Ok, plugs are gapped at 54 and they are the right length but I havent taken them back out and looked at them yet. I probably will tommorow.
AJ said the the correct pushrod length was 6.7. I am using 6.8's The instructions with the heads said to use 675's but I couldnt find any. My rockers are adjustable so I used them to make up the slack. Maybe I should take full advantage of the longer pushrods and re-adjust my rockers?
I am installing a new TPS tommorow and buming my timing up to around 16-17. Then Im going to raise the fuel pressure a tad an see how she runs. I will let you guys know how it turns out.
------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.
|