MustangWorks.com : Ford Forums - View Single Post - Kenne-Bell and ????

Killercanary · 02-04-2001, 07:05 PM

95Convert- you should be able to run at least a 13 flat with the blowzilla and your mods. My 95convert runs 13.8's now, and I still have the factory heads, MAF, injectors, and fuel pump- at least for now I just ordered a set of AFR heads, and with them will be upgrading the rest. My car with underdrives, 3.73's, K&N, HD clutch, off road bassani X pipe and 2 chamber flowmasters ran 14.5's at roughly 95mph on street tires. With the added 80rwhp associated with a 6lb blowzilla that trap speed would be around 104-105 which is enough for a 12.9 or so with traction.
My cousin just put on 6lb blowzilla on his 94GT. He still has the factory MAF, injectors, pump, etc. He does have the supplied FMU. His car has been detonating above 4500rpm's, but he said he may have too much timing. The car ran 14.2's at 97mph with underdrives, X pipe, 3.55's, and K&N, he will definitely be in the 12's now, I can attest to this after riding with him. I kid you not that I was behind him doing 45mph when he kicked it down and took off broadside. 1st and 2nd might as well not exist because all they result in is massive amounts of tire abuse! You will love the Kenne bell, it is a very impressive blower, with even more impressive power.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

02-04-2001, 07:05 PM	#8
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	95Convert- you should be able to run at least a 13 flat with the blowzilla and your mods. My 95convert runs 13.8's now, and I still have the factory heads, MAF, injectors, and fuel pump- at least for now I just ordered a set of AFR heads, and with them will be upgrading the rest. My car with underdrives, 3.73's, K&N, HD clutch, off road bassani X pipe and 2 chamber flowmasters ran 14.5's at roughly 95mph on street tires. With the added 80rwhp associated with a 6lb blowzilla that trap speed would be around 104-105 which is enough for a 12.9 or so with traction. My cousin just put on 6lb blowzilla on his 94GT. He still has the factory MAF, injectors, pump, etc. He does have the supplied FMU. His car has been detonating above 4500rpm's, but he said he may have too much timing. The car ran 14.2's at 97mph with underdrives, X pipe, 3.55's, and K&N, he will definitely be in the 12's now, I can attest to this after riding with him. I kid you not that I was behind him doing 45mph when he kicked it down and took off broadside. 1st and 2nd might as well not exist because all they result in is massive amounts of tire abuse! You will love the Kenne bell, it is a very impressive blower, with even more impressive power. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.