MustangWorks.com : Ford Forums - View Single Post

Skyman · 01-11-2001, 09:36 PM

Im going around and around on doing this suspension stuff. Grantelli Motorsports is tryin to talk me into doing a full tubular front suspesion. A-Arms, Coil overs, and K-member. For around $849.. then $400 for install.
I have busted motor/tranny mounts so they need to be pulled anyways to get fixed also.

I found a guy on the corral selling this..HAL TUBULAR K MEMBER 250.00..TUB A ARMS 250.00..COIL OVER KIT 225.00

are these a good deal? as good as granatelli's stuff? And Grantelli said it would take off around 200lbs on the front end of my car.

What other suspension sstuff should I have done? Springs at the same time too? My budgets coming close to an end as I have to get the Supercharger all dialed in too.

Recommendations?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

01-11-2001, 09:36 PM	#1
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Suspension stuff... Im going around and around on doing this suspension stuff. Grantelli Motorsports is tryin to talk me into doing a full tubular front suspesion. A-Arms, Coil overs, and K-member. For around $849.. then $400 for install. I have busted motor/tranny mounts so they need to be pulled anyways to get fixed also. I found a guy on the corral selling this..HAL TUBULAR K MEMBER 250.00..TUB A ARMS 250.00..COIL OVER KIT 225.00 are these a good deal? as good as granatelli's stuff? And Grantelli said it would take off around 200lbs on the front end of my car. What other suspension sstuff should I have done? Springs at the same time too? My budgets coming close to an end as I have to get the Supercharger all dialed in too. Recommendations? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft. Best ET 13.2@106mph Needs tuning...