MustangWorks.com : Ford Forums - View Single Post - Help! 3G in 86

withamc · 02-19-2001, 10:20 PM

Help! I've read the two web pages re: installing a 3G, but here's my problem:
Both articles refer to splicing into the stator wire to run to the alternator. Smithmonte's article says to splice into the center (white/black) on the oval connector and run it to the stator connector on the 3G. My connectors only have two wires each coming from them. The big one has the two black/orange that splice into one, and the oval connector has the green/red (which is in the center) and the yellow/white. Neithor one HAS a stator connector on it, or does it? What do I do?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

02-19-2001, 10:20 PM	#1
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Help! 3G in 86 - where's the stator wire? Help! I've read the two web pages re: installing a 3G, but here's my problem: Both articles refer to splicing into the stator wire to run to the alternator. Smithmonte's article says to splice into the center (white/black) on the oval connector and run it to the stator connector on the 3G. My connectors only have two wires each coming from them. The big one has the two black/orange that splice into one, and the oval connector has the green/red (which is in the center) and the yellow/white. Neithor one HAS a stator connector on it, or does it? What do I do? ------------------ 86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s. ************** Crane 2031 on order