You can just crimp the end of the pipe going to the h-pipe and weld it to seal.
The y-pipe(on back of heads)
can be plugged w/ the thermactor plugs from ford....$5/for the pair
Or cut the ends off the pipe, flip them around, and end-for-end them.
I relocated my power steering to where the a/c used to be, so my belt size would be different...but if you want that size e-mail me.
------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at
http://www.burnouts.webprovider.com