You can use the Trick Flow street head(non o-ring>pedestal mount) with the spring package from the Track heat head and this would yeild a .600" maximum valve lift. This would be a 135# closed spring pressure and the open pressure would probably be border line for a pedestal rocker.
SO, you could buy stud mount rockers, get the Trick Flow Emissions head ( street) with the stud mount provision with the same spring package as above.
-OR- if emissions is not a issue just get the Track Heat head. The main difference is the omission of the air pump fittings. Otherwise it has the heavier dual spring combo as above.
Of course you are always hosed by the special valve relief requirement. :-(
Mike
|