Quote:
Originally posted by USMUSL:
You can run the earlier version on the 94-95's, but you will need a least a 1 inch raise on the hood.
|
The Edelbrock Performer intake went on my 94 with no clearance problems at all. I just had to trim a piece out of the hood insulation so it didn't rest on top of one corner of the upper intake.
My personal theory is that Ford just didn't want to re-engineer the T-bird engine line just to put the old style intake on the SN-95 motors. There is more than enough room for the earlier style intake and throttle bodies in the 94-95 bodies.
If you want to put different valve covers on the 94-95 engines you will have to put a spacer under the upper because of the location of the TB. Probably run into hood clearance problems then.