MustangWorks.com : Ford Forums - View Single Post - manual break master cylinder for large calipers

Fox89GT · 03-15-2001, 12:47 PM

I got all my parts from Pep Boys. Master cylinder was for a '86 SVO Mustang, calipers from a '86 Lincoln Mark VII. You will need some MC brake lines to make the MC work with your car. You can get them from Maximum Motorsports for $40. Add some Hawk pad and stainless steel lines and you're all set. Pretty easy install once you get all the parts.

------------------
Black '89 GT, FMS wires, tune up kit, strut tower brace, KB subframes, front sway bar poly-bushings, Steeda G-brace, C/C plates, rear sway bar and sport springs, KYBs, B&M shifter, flex fan, 3.55 gears, 73mm calipers, SVO Master Cylinder and SS braided lines.

03-15-2001, 12:47 PM	#2
Fox89GT Registered Member Join Date: Sep 2000 Location: Bay Area, CA Posts: 55	I got all my parts from Pep Boys. Master cylinder was for a '86 SVO Mustang, calipers from a '86 Lincoln Mark VII. You will need some MC brake lines to make the MC work with your car. You can get them from Maximum Motorsports for $40. Add some Hawk pad and stainless steel lines and you're all set. Pretty easy install once you get all the parts. ------------------ Black '89 GT, FMS wires, tune up kit, strut tower brace, KB subframes, front sway bar poly-bushings, Steeda G-brace, C/C plates, rear sway bar and sport springs, KYBs, B&M shifter, flex fan, 3.55 gears, 73mm calipers, SVO Master Cylinder and SS braided lines.