fuel pressure whould have nothing to do with this..first lets rule out some things..do you have a baffle in the valve cover so oil cannot directly splash up into the breather?are you using a k&n style breather or more of a chrom convential breather and if so a convetionial does it have a PVC built into it or is it just a breather???is it happening on the otherside or do you not have one on the other side???is the PVC in the back of the intake hooked up???if so where 2(i.e. the TB port or the intake)remove the upper intake and see if you have oil in it??check these things then we can go from there..i know where ur comming from cuz i fixed oil in the intake and oil commming from breathers on a couple cars b4..also look in summit i belive and they have adapter that cure such a problem with a piece that goes inline with the breather and allows only gasses to escape..no oil..comething to look into..i havenet had to use one yet but they look like they would work well
------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch
|