Getting Weld Draglites, What offset do I need?

5ohCOUPE · 12-14-2001, 10:28 PM

Im getting 15x3 1/2 for the front and 15x8 for the rear. Will i be able to get a 275/50/15 tire under the rear fender well with a 5 1/2 inch offset?

MikeWeber · 12-15-2001, 05:56 AM

They should fit fine with limited hammer work. It may rub a little on the inner fender well under full suspension travel, but then again it may not.

12-14-2001, 10:28 PM	#1
5ohCOUPE Registered Member Join Date: Sep 2001 Location: ORANGE PARK FL. USA Posts: 208	Getting Weld Draglites, What offset do I need? Im getting 15x3 1/2 for the front and 15x8 for the rear. Will i be able to get a 275/50/15 tire under the rear fender well with a 5 1/2 inch offset? __________________ 91 LX COUPE, 3.73 gears, 2 1/2 inch H-Pipe, 1 5/8 MAC long tube headers, 73 MM C&L MAF, 70 MM MAC TB, LUNATI cam,1.7 TFS Rockers, TFS Track Heat heads, TFS Track Heat intake, T5 with PRO 5.0 shifter, Griffin aluminum radiator, Fluid Damper, SSM traction bars, 190 GPH in tank fuel pump. And more to come.

12-15-2001, 05:56 AM	#2
MikeWeber Registered Member Join Date: Aug 2001 Location: Louisville, KY, USA Posts: 48	They should fit fine with limited hammer work. It may rub a little on the inner fender well under full suspension travel, but then again it may not. __________________ 88 NMRA Pure Street coupe 95 GT-heads, cam, exhaust, intake, road-race suspension 97 Taurus SHO-K&N, ported meter 95 Escort GT-Pacesetter header & exhaust, Weapon R intake tube

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cleaning Weld Draglites. Help!!!!!!!!!	eeh102582	Windsor Power	9	04-04-2004 03:37 AM
Weld draglites on a Turbo coupe rear	QuantumMotorsports	Windsor Power	0	09-07-2003 11:46 PM
Cleaning waterspot and road grim From Weld draglites	eeh1025	Windsor Power	4	04-05-2003 08:26 AM
Poll: Weld Draglites or 5-spoke Cobra polished?	TCMotorsports	Windsor Power	3	08-25-2001 06:52 AM
What backspacing for Weld Draglites?	88GT5.013.02	Windsor Power	3	02-27-2001 04:52 PM