Want a torque monster...

Fox Hound · 08-28-2002, 02:13 PM

I'm not towing a boat or anything but I just wanted to know what is a good combination of parts to build a street only high torque motor with a stock block (heads, manifold, cam, exhaust, MAF, TB etc). RPMs would be between 1500-5500 or so. Tranny is a stock T-5 with 3.55 gears. Any other info needed? Thanks. Or should I just say, screw it and get a Kenne-Bell 6# positive supercharger...

blue00gt · 08-28-2002, 03:41 PM

For a lot of torque you are either going to need more cubic inches or forced induction. If you just want a good streetcar with instant torque available at low rpms I'd go with a roots blower like you mentioned.

chris91LX · 08-28-2002, 04:19 PM

Nitrous would do that for you for a cheap initial investment.

BilLster · 08-28-2002, 10:19 PM

460 and then the blower enough to start with

08-28-2002, 02:13 PM	#1
Fox Hound Registered Member Join Date: Nov 2001 Location: Bay Area, CA Posts: 58	Want a torque monster... I'm not towing a boat or anything but I just wanted to know what is a good combination of parts to build a street only high torque motor with a stock block (heads, manifold, cam, exhaust, MAF, TB etc). RPMs would be between 1500-5500 or so. Tranny is a stock T-5 with 3.55 gears. Any other info needed? Thanks. Or should I just say, screw it and get a Kenne-Bell 6# positive supercharger...

08-28-2002, 03:41 PM	#2
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	For a lot of torque you are either going to need more cubic inches or forced induction. If you just want a good streetcar with instant torque available at low rpms I'd go with a roots blower like you mentioned. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

08-28-2002, 04:19 PM	#3
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	Nitrous would do that for you for a cheap initial investment. __________________ My Ford Club http://www.midwestfords.org/ Best time N/A 12.9 @ 107 1.711 60' 125 shot - 12.04 @ 113 1.59 60'

08-28-2002, 10:19 PM	#4
BilLster Registered Member Join Date: Oct 2000 Location: Ontario canada Posts: 446	460 and then the blower enough to start with __________________ 89 with 331 t3'/t4 hybrids. upr Suspention worked out finnaly . 9.89 144 mph .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
Torque strap. Yes or no	Dark_5.0	Windsor Power	3	06-05-2003 07:00 AM
T-5 Torque Rating	sleeperstang	Classic Mustangs	5	07-05-2002 10:54 PM
T-5 Torque Rating	sleeperstang	Windsor Power	1	06-27-2002 08:18 PM