1.72 Roller Rockers ?

83GTMUSTANG · 05-13-2005, 10:16 PM

How Much Lift And Duration Will I Get With 1.72 Roller Rockers And A E 303 Cam (.498 In. Of Lift An 220 Duration With 1.6 Rockers)..............thanks

89fast5oh · 05-15-2005, 01:18 PM

You will get .535" of lift with 1.72 rocker arms. I'm not sure if it really changes the duration at all though, maybe a tiny bit.

83GTMUSTANG · 05-15-2005, 01:35 PM

Thanks.......... WILL I HAVE ANY PISTON TO VALVE PROBLEMS WITH STOCK 91' PISTONS

89fast5oh · 05-15-2005, 05:27 PM

I'm not sure, what kind of heads are you running? More than likely it might hit. The only way to be sure is to check for piston to valve clearence.

83GTMUSTANG · 05-15-2005, 05:29 PM

Im Running Stock Ported Heads With Stock Valves.....

05-13-2005, 10:16 PM	#1
83GTMUSTANG N-V-ME Join Date: May 2005 Location: SOUTHFIELD,MICHIGAN Posts: 155	1.72 Roller Rockers ? How Much Lift And Duration Will I Get With 1.72 Roller Rockers And A E 303 Cam (.498 In. Of Lift An 220 Duration With 1.6 Rockers)..............thanks

05-15-2005, 01:18 PM	#2
89fast5oh Registered Member Join Date: Apr 2002 Location: Canada Posts: 58	Re: 1.72 Roller Rockers ? You will get .535" of lift with 1.72 rocker arms. I'm not sure if it really changes the duration at all though, maybe a tiny bit. __________________ 351W .030", AFR 185s, Crane roller cam-.543" 220 -.562" 228@.050, TFS 351W EFI intake, Billet Roller Rockers, BBK Long Tubes, BBK X- Pipe, Dynomax Race Magnums w/dumps, 30lb injectors, 190lph intank pump, Holley Adjustable FPR, 75mm TB&MA, Underdrive pulleys, Aluminum Rad, Billet Flywheel, McCloud Clutch, World Class T-5, B&M Ripper Shifter 4.10s, McCreary G-60s, Lakewood 90/10s, Comp. Enginering 3 way adjust/rear, Upper and Lower Control arms, Autometer gauges.

05-15-2005, 01:35 PM	#3
83GTMUSTANG N-V-ME Join Date: May 2005 Location: SOUTHFIELD,MICHIGAN Posts: 155	Re: 1.72 Roller Rockers ? Thanks.......... WILL I HAVE ANY PISTON TO VALVE PROBLEMS WITH STOCK 91' PISTONS

05-15-2005, 05:27 PM	#4
89fast5oh Registered Member Join Date: Apr 2002 Location: Canada Posts: 58	Re: 1.72 Roller Rockers ? I'm not sure, what kind of heads are you running? More than likely it might hit. The only way to be sure is to check for piston to valve clearence. __________________ 351W .030", AFR 185s, Crane roller cam-.543" 220 -.562" 228@.050, TFS 351W EFI intake, Billet Roller Rockers, BBK Long Tubes, BBK X- Pipe, Dynomax Race Magnums w/dumps, 30lb injectors, 190lph intank pump, Holley Adjustable FPR, 75mm TB&MA, Underdrive pulleys, Aluminum Rad, Billet Flywheel, McCloud Clutch, World Class T-5, B&M Ripper Shifter 4.10s, McCreary G-60s, Lakewood 90/10s, Comp. Enginering 3 way adjust/rear, Upper and Lower Control arms, Autometer gauges.

05-15-2005, 05:29 PM	#5
83GTMUSTANG N-V-ME Join Date: May 2005 Location: SOUTHFIELD,MICHIGAN Posts: 155	Re: 1.72 Roller Rockers ? Im Running Stock Ported Heads With Stock Valves.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F Cam With Stock Rockers Or E Cam With 1.72 Roller Rockers ?	83GTMUSTANG	Windsor Power	0	05-12-2005 12:12 PM
Roller rockers for stock heads	QuantumMotorsports	Windsor Power	1	07-14-2003 03:15 PM
Roller Rockers, bad?	HiFlow5 0	Windsor Power	1	04-14-2002 01:35 PM
reg rockers or roller rockers??	Chevysucks	Windsor Power	1	12-05-2001 08:17 PM
Valve Springs & Roller Rockers	StreetStang37	Windsor Power	4	04-17-2001 03:54 AM