347 Boss Intake who has one?

Idhomustang · 11-05-2001, 09:39 PM

A friend of mine is building a nightmare and needs a intake manifold. The combo he has is a follows a 302W block with 4V351 Clevland heads. He needs a intake that has a rpm range approximately 4-9000 RPM..

Idhomustang..:> )

------------------
393,9.5" 351W
830 Holley HP
Victor Jr.
Home made Cool Air Pan
Pro Billet MSD

Dark Knight · 11-10-2001, 03:50 PM

you need a track boss intake... not a boss 302 one..they arent made anymore... B and A used to make them.. you can find 'em at swap meets and stuff.. http://cgi.ebay.netscape.com/ebaymot...583859&r=0&t=0
something like this but for a 302.. ;-)

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.85@102.5
and a '68 stang that WAS nasty ;-)

PKRWUD · 11-10-2001, 05:37 PM

This isn't what you need either, but it's such a killer piece, I wanted to share...
http://cgi.ebay.com/aw-cgi/eBayISAPI...tem=1027935613

Take care,
-Chris

------------------
Retired Moderator
MustangNet

My site: Peckerwoods Pit Stop

My teams site: Jim Porter Racing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN.

Idhomustang · 11-10-2001, 07:08 PM

Hey, thanks, this is closer to what he needs, his operating rpm will be 4000-9500.

------------------
393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan,
Pro Billet MSD,
MSD 6AL,
XE 284H Xtr-Com cam,
240-246 @.050,

11-05-2001, 09:39 PM	#1
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	347 Boss Intake who has one? A friend of mine is building a nightmare and needs a intake manifold. The combo he has is a follows a 302W block with 4V351 Clevland heads. He needs a intake that has a rpm range approximately 4-9000 RPM.. Idhomustang..:> ) ------------------ 393,9.5" 351W 830 Holley HP Victor Jr. Home made Cool Air Pan Pro Billet MSD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow intake problems	shacar87	Windsor Power	9	11-14-2003 05:53 PM
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

11-10-2001, 03:50 PM	#2
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	you need a track boss intake... not a boss 302 one..they arent made anymore... B and A used to make them.. you can find 'em at swap meets and stuff.. http://cgi.ebay.netscape.com/ebaymot...583859&r=0&t=0 something like this but for a 302.. ;-) ------------------ 84 convt,'95 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.85@102.5 and a '68 stang that WAS nasty ;-)

11-10-2001, 05:37 PM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	This isn't what you need either, but it's such a killer piece, I wanted to share... http://cgi.ebay.com/aw-cgi/eBayISAPI...tem=1027935613 Take care, -Chris ------------------ Retired Moderator MustangNet My site: Peckerwoods Pit Stop My teams site: Jim Porter Racing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN.

11-10-2001, 07:08 PM	#4
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	Hey, thanks, this is closer to what he needs, his operating rpm will be 4000-9500. ------------------ 393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan, Pro Billet MSD, MSD 6AL, XE 284H Xtr-Com cam, 240-246 @.050,