4.10 GEARS

Blue_99GT · 08-27-2001, 11:26 AM

I'm loming to get Ford Racing 4.10 gears for my 99GT auto. I'm tryind to find somewhere in the central OHIO AREA that can point me to a good shop. Also what should I do to get the speedo corrected?
1. Reflash the computer?
2. A chip?(what kind)

THANKS

cvenom96 · 08-27-2001, 03:28 PM

Can't help on where to get the gears installed as I am in Mississippi but you can either get a new speedo gear or a Speedcal module (I think that is what it is called). the gear will get chewed up but they are cheap. The other plugs into the sensor and harness at the transmission. I think someone asked about this on here somewhere so you might look around to find out the name of that module. I think it is around $100 give or take a few $$! Hope that helps a little

------------------
96 Crystal White Cobra Coupe
4:10 gears, off-road h-pipe, 2 chamber flowmasters, K&N, pulleys, FMS springs, polyurethane bushing, Steeda Caster/Camber plates

blue00gt · 08-28-2001, 06:34 PM

You can check out the Speedcal at Dallas Mustang: http://www.dallasmustang.com/

cvenom96 · 08-29-2001, 09:20 AM

There is also an article on just this thing in this months issue of Muscle Mustangs and Fast Fords.

08-27-2001, 11:26 AM	#1
Blue_99GT Registered Member Join Date: Jul 2001 Posts: 1	4.10 GEARS I'm loming to get Ford Racing 4.10 gears for my 99GT auto. I'm tryind to find somewhere in the central OHIO AREA that can point me to a good shop. Also what should I do to get the speedo corrected? 1. Reflash the computer? 2. A chip?(what kind) THANKS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3.73 v. 4.10 Gears	GTMustang96	Modular Madness	20	03-20-2003 06:36 PM
4.10 Or 4.30 Gears In 8" Rear?	jimijuggernaut	Classic Mustangs	4	02-28-2003 04:33 PM
How good are 4.10 gears and AOD?	KG88GT	Windsor Power	11	02-02-2002 10:34 PM
4.10 gears	swtstang	Windsor Power	1	06-22-2001 06:33 PM
whats gears 3.75 or 4.10 with a ZT-5	terrible0ne	Windsor Power	2	03-24-2001 11:07 AM

08-27-2001, 03:28 PM	#2
cvenom96 Registered Member Join Date: Aug 2001 Location: Madison, MS Posts: 52	Can't help on where to get the gears installed as I am in Mississippi but you can either get a new speedo gear or a Speedcal module (I think that is what it is called). the gear will get chewed up but they are cheap. The other plugs into the sensor and harness at the transmission. I think someone asked about this on here somewhere so you might look around to find out the name of that module. I think it is around $100 give or take a few $$! Hope that helps a little ------------------ 96 Crystal White Cobra Coupe 4:10 gears, off-road h-pipe, 2 chamber flowmasters, K&N, pulleys, FMS springs, polyurethane bushing, Steeda Caster/Camber plates

08-28-2001, 06:34 PM	#3
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	You can check out the Speedcal at Dallas Mustang: http://www.dallasmustang.com/

08-29-2001, 09:20 AM	#4
cvenom96 Registered Member Join Date: Aug 2001 Location: Madison, MS Posts: 52	There is also an article on just this thing in this months issue of Muscle Mustangs and Fast Fords.