specs on 82 cam

matt cook · 12-05-2001, 10:49 AM

does anyone know the specs on the original flat tappet cam in an 82GT?
thanks

matt cook · 12-05-2001, 11:02 AM

260/274

0.416/0.444

what will this be like with these lifts (w/ 1.7's)?

0.442/0.472

PKRWUD · 12-08-2001, 06:00 AM

You are correct. More specifically:
Opening: (int.) 15 degrees BTDC / (exh.) 68 degrees BBDC
Closing: (int.) 65 degrees ABDC / (exh.) 26 degrees ATDC
Duration: (int.) 260 degrees / (exh.) 274 degrees
Overlap: 41 degrees
Lobe lift: (int.) .260" / (exh.) .278"
Valve lift w/ 1.6: (int.) .416" / (exh.) .444"
Valve lift w/ 1.7: (int.) .442" / (exh.) .473"
Lobe center: (int.) 115 degrees / (exh.) 114 degrees
Part number: D3OE-6250-AA

Take care,
-Chris

matt cook · 12-08-2001, 08:46 AM

thanks!

gotta like 'eddie the 'ead

up the irons...

12-05-2001, 10:49 AM	#1
matt cook Registered Member Join Date: Dec 1998 Location: Richmond, Virginia Posts: 449	specs on 82 cam does anyone know the specs on the original flat tappet cam in an 82GT? thanks __________________ 1982 Mustang GT

12-05-2001, 11:02 AM	#2
matt cook Registered Member Join Date: Dec 1998 Location: Richmond, Virginia Posts: 449	does this sound right? 260/274 0.416/0.444 what will this be like with these lifts (w/ 1.7's)? 0.442/0.472 __________________ 1982 Mustang GT

12-08-2001, 06:00 AM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	You are correct. More specifically: Opening: (int.) 15 degrees BTDC / (exh.) 68 degrees BBDC Closing: (int.) 65 degrees ABDC / (exh.) 26 degrees ATDC Duration: (int.) 260 degrees / (exh.) 274 degrees Overlap: 41 degrees Lobe lift: (int.) .260" / (exh.) .278" Valve lift w/ 1.6: (int.) .416" / (exh.) .444" Valve lift w/ 1.7: (int.) .442" / (exh.) .473" Lobe center: (int.) 115 degrees / (exh.) 114 degrees Part number: D3OE-6250-AA Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-08-2001, 08:46 AM	#4
matt cook Registered Member Join Date: Dec 1998 Location: Richmond, Virginia Posts: 449	thanks! gotta like 'eddie the 'ead up the irons... __________________ 1982 Mustang GT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aluminum Head Torque Specs	92MUFDVR	Windsor Power	5	07-24-2003 09:14 AM
Anyone know a website with 96-98 mustang gt specs???	96_4.6	Blue Oval Lounge	4	03-10-2003 01:23 PM
Rear Seat Delete Specs???	5.0L_Of_Fury	Blue Oval Lounge	5	08-07-2002 12:44 AM
Question about stock cam specs	MustangGT1990	Windsor Power	11	04-03-2002 10:04 AM
CAMBER AND CASTER SPECS FOR LIGHT AUTO X?	LOCASH	Corner Carvers Delight	2	01-06-2001 09:48 PM