speed density

XZILR8TION · 01-03-2001, 10:57 AM

what mods. will a speed density system handle? and still be driver friendly?

LOCASH · 01-03-2001, 12:11 PM

There is a racer named Brian Smith who is running GT-40 heads and a Cobra intake. I am not sure what he is running but it's really fast and with speed density. He is at www.stangcrazy.com.

------------------
86 GT T-tops, AOD, B&M shift kit and hammer shifter, ROH wheels, K&N, Timing,MAC headers, 2.5 off road H, 2.5 American Thunder, 87 spindles, rear disc,SS lines, BBK 1.5, poly bushings, Crutchfield front kick panel speakers.

88PONY · 01-03-2001, 02:58 PM

You can touch everthing but the cam!
Biggest improvement is 1.7 rockers!!!

------------------
88 NOTCH DSS 331CI C-4 BRAKE 4:10'S 11.5-1 DART IRON HEADS X-CAM 1.7 ROCKERS 8PT. CAGE BEST 10.9@125MPH 100% STREETALBE TO ME!!!

01-03-2001, 04:04 PM

88Workcar a member on this site runs speed density with a B303 cam,edelbrock heads,cobra intake,flowtech long tubes,4.30 gears.He run's low 12's with no problems at all.

------------------

Paxton Blown 87GT
Mustang..it's not just a car,it's an attitude

kystang86 · 01-03-2001, 08:09 PM

sounds like we are in the same boat..i,m looking at going mass air...

88workcar · 01-04-2001, 10:34 PM

How fast do you want to go?

------------------
Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac,
12.38 @ 111.28 1.80 60ft 28X10 street tires
12.17 @ 112 26 X 10 slicks
http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg

XZILR8TION · 01-11-2001, 01:27 PM

just trying to make it a little faster not set land speed record i drive it about 60 miles a day to work it has: 3.73 rears,underdrive pullys, air silencer removed timing bumped,2.5 w\ h- ,pipes i also have a complete upper and lower of a 89 gt will this help?

[This message has been edited by XZILR8TION (edited 01-11-2001).]

XZILR8TION · 01-11-2001, 01:29 PM

Quote:

Originally posted by 88workcar:
How fast do you want to go?

not trying to leave the ground or anything, just want it a little faster than stock

Project AOD · 01-11-2001, 07:03 PM

I've gone 11.99 speed density,stock cam,AOD..

------------------

Project AOD · 01-11-2001, 07:04 PM

I've gone 11.99 speed density,stock cam,AOD..

------------------

88workcar · 01-12-2001, 08:01 AM

I went 11.72 @ 116, 100 shot of happy juice. It was a bad pass. I spun, let up, got in it again, then missed 5th at the end. Right now my best motor pass is 12.17 @ 112+. And if I ever finish all the problems that I am having, I should brake 11s with the motor. Speed density is great, people just are scared of it because of old stories that have dressed it out to be a horror. I have simple mods, heads, cam, intake, pullies, headers, offroads, 4.30s, 28 x 10 tires, no sway bars, air bags, 70/30s, fuel press reg, MSD 6A & blaster II coil, 3core radiator, 190stat, alumn drive shaft, 4 clutches and a heavy sping in the rear end, center force clutch, A and a attitude

------------------
Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac,
12.38 @ 111.28 1.80 60ft 28X10 street tires
12.17 @ 112 26 X 10 slicks
http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg

01-03-2001, 10:57 AM	#1
XZILR8TION Registered Member Join Date: Dec 2000 Location: FRANKFORT,KY Posts: 11	speed density what mods. will a speed density system handle? and still be driver friendly?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First ticket. Sucks, sucks bad.	zepherman	Blue Oval Lounge	46	12-16-2001 07:24 PM
EFI conversion with Speed Density and a 351w?	PSI GUY	Windsor Power	2	12-02-2001 11:13 PM
12 second speed density	Yan88gt	Windsor Power	9	09-13-2001 09:13 PM
wan't to go faster with N/A speed density	Yan88gt	Windsor Power	4	06-13-2001 11:10 PM
speed density question..	bobtodd	Blue Oval Lounge	2	04-15-2001 02:03 AM

01-03-2001, 12:11 PM	#2
LOCASH Registered Member Join Date: Oct 2000 Location: Santa Lucia di Budoia, Italy Posts: 217	There is a racer named Brian Smith who is running GT-40 heads and a Cobra intake. I am not sure what he is running but it's really fast and with speed density. He is at www.stangcrazy.com. ------------------ 86 GT T-tops, AOD, B&M shift kit and hammer shifter, ROH wheels, K&N, Timing,MAC headers, 2.5 off road H, 2.5 American Thunder, 87 spindles, rear disc,SS lines, BBK 1.5, poly bushings, Crutchfield front kick panel speakers.

01-03-2001, 02:58 PM	#3
88PONY Registered Member Join Date: Nov 2000 Location: INDIO CA USA Posts: 141	You can touch everthing but the cam! Biggest improvement is 1.7 rockers!!! ------------------ 88 NOTCH DSS 331CI C-4 BRAKE 4:10'S 11.5-1 DART IRON HEADS X-CAM 1.7 ROCKERS 8PT. CAGE BEST 10.9@125MPH 100% STREETALBE TO ME!!!

01-03-2001, 04:04 PM	#4
Mustanguy Guest Posts: n/a	88Workcar a member on this site runs speed density with a B303 cam,edelbrock heads,cobra intake,flowtech long tubes,4.30 gears.He run's low 12's with no problems at all. ------------------ Paxton Blown 87GT Mustang..it's not just a car,it's an attitude

01-03-2001, 08:09 PM	#5
kystang86 Registered Member Join Date: Jul 2000 Location: frankfort,ky Posts: 54	sounds like we are in the same boat..i,m looking at going mass air...

01-04-2001, 10:34 PM	#6
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	How fast do you want to go? ------------------ Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac, 12.38 @ 111.28 1.80 60ft 28X10 street tires 12.17 @ 112 26 X 10 slicks http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg

01-11-2001, 01:27 PM	#7
XZILR8TION Registered Member Join Date: Dec 2000 Location: FRANKFORT,KY Posts: 11	just trying to make it a little faster not set land speed record i drive it about 60 miles a day to work it has: 3.73 rears,underdrive pullys, air silencer removed timing bumped,2.5 w\ h- ,pipes i also have a complete upper and lower of a 89 gt will this help? [This message has been edited by XZILR8TION (edited 01-11-2001).]

01-11-2001, 07:03 PM	#9
Project AOD Registered Member Join Date: Jan 2001 Location: Monaca,Pa. Posts: 10	I've gone 11.99 speed density,stock cam,AOD.. ------------------

01-11-2001, 07:04 PM	#10
Project AOD Registered Member Join Date: Jan 2001 Location: Monaca,Pa. Posts: 10	I've gone 11.99 speed density,stock cam,AOD.. ------------------

01-12-2001, 08:01 AM	#11
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I went 11.72 @ 116, 100 shot of happy juice. It was a bad pass. I spun, let up, got in it again, then missed 5th at the end. Right now my best motor pass is 12.17 @ 112+. And if I ever finish all the problems that I am having, I should brake 11s with the motor. Speed density is great, people just are scared of it because of old stories that have dressed it out to be a horror. I have simple mods, heads, cam, intake, pullies, headers, offroads, 4.30s, 28 x 10 tires, no sway bars, air bags, 70/30s, fuel press reg, MSD 6A & blaster II coil, 3core radiator, 190stat, alumn drive shaft, 4 clutches and a heavy sping in the rear end, center force clutch, A and a attitude ------------------ Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac, 12.38 @ 111.28 1.80 60ft 28X10 street tires 12.17 @ 112 26 X 10 slicks http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg