mac or dynomax?

88COBRA · 04-08-2001, 04:10 PM

Well I have scrapped my side exhaust idea. I just cannot find anyone with it to compare.

I am now going to get some headers and new mufflers, the rest of my system is OK.

Which mufflers? MAC or Dynomax? Which model? Have any sounds?

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

mufflerboy · 04-08-2001, 04:26 PM

I remember when we talked that time and you liked the sound of my 2 chamber flowmasters, though they are loud I think the 3 chamber ones would make you very happy because they dont have the loud drone of the 2chambers

------------------
93 coupe,373's ripper shifter,MAC 1-5/8 equal lengths,MAC 2-1/2" H-pipe with cats,flowmaster 2 chambers,lowered 1-1/2" with BBK springs.Motorsport HD clutch,,FMS pullies,75mm bullet maf,walbro 190 lph fuel pump,kirban adj fpr.edelbrock 6037's e303, cobra intake
frpp 1.6 roller rockers
mac cold air kit

mufflerboy · 04-08-2001, 04:29 PM

I remember when we talked that
time and you liked the sound
of my 2 chamber flowmasters,
though they are loud I think
the 3 chamber ones would make
you very happy because they
dont have the loud drone of
the 2chambers

------------------
93 coupe,373's ripper shifter,MAC 1-5/8 equal lengths,MAC 2-1/2" H-pipe with cats,flowmaster 2 chambers,lowered 1-1/2" with BBK springs.Motorsport HD clutch,,FMS pullies,75mm bullet maf,walbro 190 lph fuel pump,kirban adj fpr.edelbrock 6037's e303, cobra intake
frpp 1.6 roller rockers
mac cold air kit

88COBRA · 04-08-2001, 04:30 PM

I remember that

How would they sound on my stock car? They sound great on yours with the h-pipe but what about on mine?

I always thought that MAC or Dynomax sounded better on a stock car?

Mufflerboy, where did you buy yours? How much?

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

mufflerboy · 04-08-2001, 04:44 PM

I bought an american thunder cat back from summit it seemed cheapat first but with shipping and duty it works out to cost more. I know this might sound funny but you can get almost any thing you want for your car at Canadian tire.
you can either get just three chamber mufflers or a force 2 cat back if you want with thee muffleres and 2-1/2" pipes
It would still sound good on your car but not to loud because of your stock Hpipe

DemonGT · 04-08-2001, 07:17 PM

i have the mac catback...mac flowpath mufflers...i think mac mufflers sound awsome..i have a freind with dynomax and i was not impressed by the sound..and flowturds do sound ok but there to common and to much of a hollow sound

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb

04-08-2001, 08:21 PM

Between the 2,MAC & Dynomax,go for the Mac.

I had Dynomax super turbos on my car for a year and wasn't impressed at all. They don't have the performance sound that a muscle car should have,plus,look at how the exhaust flows while trying to exit once,I couldn't believe I even installed them *LOL* Now i'm running 2 chamber Flowmasters,but have thought about changing to MAC.

Goto www.mustangworld.com they have a section with a bunch of audio files of different exhaust set-ups.

------------------
Paxton Blown 87GT
ICQ#112698436

LX XLR8R · 04-09-2001, 08:08 AM

MAC without a doubt..i will allway say this..i got long tubes, off road hpipe, and flowpath cat back and my car barks when you rev it..best sound in the world and no 2000rpm drone..and makes ur car sound wild at even an idle..im ganna put it on all my future stangs

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

Green92LX · 04-09-2001, 02:14 PM

MAC FLOWPATH

------------------
1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler
Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

88COBRA · 04-10-2001, 08:21 AM

Well after posting on all the message boards on the net, I have decided on MAC.

My Ford dealer can get them for me for only $89.99CDN, that is a great deal. I will order those today, get them on tomorrow, I hope. I called a parts store for Flows, they want $120.

I will hold off on the headers until I get a little more money.

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
LOTS OF PRODUCTS, AWESOME PRICES! Visit my site:
http://www.stangpower.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.6 exhaust dynomax or ...help???	steeler192	Modular Madness	3	10-12-2003 09:04 PM
Dynomax super turbo or race magnum cat back?	Grn92LX	Windsor Power	9	05-03-2002 06:32 AM
which dynomax muffler is the loudest	tireburner163	Blue Oval Lounge	1	07-25-2001 11:13 PM
Dynomax Bullet Mufflers	Eric's GT	Blue Oval Lounge	0	06-05-2001 04:32 PM
MAC vs. Dynomax	Green5.0	Modular Madness	2	07-04-2000 02:41 PM

04-08-2001, 04:10 PM	#1
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	mac or dynomax? Well I have scrapped my side exhaust idea. I just cannot find anyone with it to compare. I am now going to get some headers and new mufflers, the rest of my system is OK. Which mufflers? MAC or Dynomax? Which model? Have any sounds? Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

04-08-2001, 04:26 PM	#2
mufflerboy Registered Member Join Date: Jan 1999 Posts: 126	I remember when we talked that time and you liked the sound of my 2 chamber flowmasters, though they are loud I think the 3 chamber ones would make you very happy because they dont have the loud drone of the 2chambers ------------------ 93 coupe,373's ripper shifter,MAC 1-5/8 equal lengths,MAC 2-1/2" H-pipe with cats,flowmaster 2 chambers,lowered 1-1/2" with BBK springs.Motorsport HD clutch,,FMS pullies,75mm bullet maf,walbro 190 lph fuel pump,kirban adj fpr.edelbrock 6037's e303, cobra intake frpp 1.6 roller rockers mac cold air kit

04-08-2001, 04:29 PM	#3
mufflerboy Registered Member Join Date: Jan 1999 Posts: 126	I remember when we talked that time and you liked the sound of my 2 chamber flowmasters, though they are loud I think the 3 chamber ones would make you very happy because they dont have the loud drone of the 2chambers ------------------ 93 coupe,373's ripper shifter,MAC 1-5/8 equal lengths,MAC 2-1/2" H-pipe with cats,flowmaster 2 chambers,lowered 1-1/2" with BBK springs.Motorsport HD clutch,,FMS pullies,75mm bullet maf,walbro 190 lph fuel pump,kirban adj fpr.edelbrock 6037's e303, cobra intake frpp 1.6 roller rockers mac cold air kit

04-08-2001, 04:30 PM	#4
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	I remember that How would they sound on my stock car? They sound great on yours with the h-pipe but what about on mine? I always thought that MAC or Dynomax sounded better on a stock car? Mufflerboy, where did you buy yours? How much? Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com

04-08-2001, 04:44 PM	#5
mufflerboy Registered Member Join Date: Jan 1999 Posts: 126	I bought an american thunder cat back from summit it seemed cheapat first but with shipping and duty it works out to cost more. I know this might sound funny but you can get almost any thing you want for your car at Canadian tire. you can either get just three chamber mufflers or a force 2 cat back if you want with thee muffleres and 2-1/2" pipes It would still sound good on your car but not to loud because of your stock Hpipe

04-08-2001, 07:17 PM	#6
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	i have the mac catback...mac flowpath mufflers...i think mac mufflers sound awsome..i have a freind with dynomax and i was not impressed by the sound..and flowturds do sound ok but there to common and to much of a hollow sound ------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb

04-08-2001, 08:21 PM	#7
Mustanguy Guest Posts: n/a	Between the 2,MAC & Dynomax,go for the Mac. I had Dynomax super turbos on my car for a year and wasn't impressed at all. They don't have the performance sound that a muscle car should have,plus,look at how the exhaust flows while trying to exit once,I couldn't believe I even installed them LOL Now i'm running 2 chamber Flowmasters,but have thought about changing to MAC. Goto www.mustangworld.com they have a section with a bunch of audio files of different exhaust set-ups. ------------------ Paxton Blown 87GT ICQ#112698436

04-09-2001, 08:08 AM	#8
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	MAC without a doubt..i will allway say this..i got long tubes, off road hpipe, and flowpath cat back and my car barks when you rev it..best sound in the world and no 2000rpm drone..and makes ur car sound wild at even an idle..im ganna put it on all my future stangs ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch

04-09-2001, 02:14 PM	#9
Green92LX Registered Member Join Date: Jun 1999 Location: North Haven,CT Posts: 336	MAC FLOWPATH ------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

04-10-2001, 08:21 AM	#10
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Well after posting on all the message boards on the net, I have decided on MAC. My Ford dealer can get them for me for only $89.99CDN, that is a great deal. I will order those today, get them on tomorrow, I hope. I called a parts store for Flows, they want $120. I will hold off on the headers until I get a little more money. Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded LOTS OF PRODUCTS, AWESOME PRICES! Visit my site: http://www.stangpower.com