MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-19-2003, 09:13 PM   #1
90lxracer
Registered Member
 
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
Thumbs up SysteMax Kit Installed!

I just got finished installing the my holley systemax kit and man it runs like a charm. I expected to have to play with the timing and fuel pressure but it runs great right off the bat. Sounds great too. Cant wait till i break it in to feel what it really has!


Adam
__________________
1990 lx 5.0L 5 spd.
BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/
pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys

1997 Chevy Silverado Z71 4x4
6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges
90lxracer is offline   Reply With Quote
Old 02-19-2003, 09:31 PM   #2
1jimmy__d
Registered Member
 
Join Date: Apr 2002
Posts: 299
Default

sweet! let me know what she runs! I just bought a car with the systemax II in it. is that what yours is? soundls like it. good luck with it. mine has 5000 miles on the motor! cant wait to drive her in the summer. he said it ran a 13.2 and didnt hook up at launch! does that sound right??
__________________
90 lx hatch, holley systemax II kit, rebuilt 302, BBK 155 lph fuel pump, pro M bullet mass meter wtih BBk cold air intake, 30 # injectors, 70 mm TB, jacobs ignition system, edelbrock water pump, BBk longtube headers with h-pipe, flowmasters, b&m ripper shifter, 3.55 gears, Proform electric fan, subframe connectors/removed smog pump and ac!

75 shot of nitrous!

13.2 at 112 1/4 mile- no traction!
1jimmy__d is offline   Reply With Quote
Old 02-19-2003, 10:33 PM   #3
90lxracer
Registered Member
 
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
Default

Yea i have the systemax II kit. That car has 12 sec. potential with good traction without a doubt. I would just hate to have to wait until summer to drive it, good thing im in texas, where its 70 degrees. But then again tomorrow it will probably be 30 degrees the way texas is.
__________________
1990 lx 5.0L 5 spd.
BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/
pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys

1997 Chevy Silverado Z71 4x4
6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges
90lxracer is offline   Reply With Quote
Old 02-20-2003, 10:36 AM   #4
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: SysteMax Kit Installed!

Quote:
Originally posted by 90lxracer
I just got finished installing the my holley systemax kit and man it runs like a charm. I expected to have to play with the timing and fuel pressure but it runs great right off the bat. Sounds great too. Cant wait till i break it in to feel what it really has!


Adam
Nice, did you just install it on your stock short block?
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 02-20-2003, 12:53 PM   #5
bigred90gt
2 Stangs in the Stable
 
bigred90gt's Avatar
 
Join Date: Apr 2002
Location: Baytown, TX
Posts: 1,209
Default

Quote:
Originally posted by 90lxracer
Yea i have the systemax II kit. That car has 12 sec. potential with good traction without a doubt. I would just hate to have to wait until summer to drive it, good thing im in texas, where its 70 degrees. But then again tomorrow it will probably be 30 degrees the way texas is.
Where at in Houston are you at? Do you race at HRP? I plan to go there tomorrow if I can get off of work early enough. Let us know how the kit does.

Caymon
__________________
'90 GT Under construction
Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!!
04 F-150 STX 4.2L 5 spd
Rice Haters Club Member #128
bigred90gt is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
installed pa performance alt GhettoPop Windsor Power 1 04-11-2004 09:42 PM
Had 4.10's installed....car tops out at 99mph??!! wantapony2001 Modular Madness 10 08-04-2003 02:31 PM
systemax 1bigc Windsor Power 0 07-17-2002 01:57 PM
What do u think of The Holley systemax 2 kit drtbiker Windsor Power 2 05-05-2002 10:06 PM
Systemax or AFR? chris91LX Windsor Power 4 12-19-2001 02:49 PM


All times are GMT -5. The time now is 07:51 AM.


SEARCH