MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-12-2003, 02:42 PM   #1
sn95gt19
motors done......woohooo
 
Join Date: Mar 2002
Posts: 799
Default darn work car problem again

ok i posted awhile ago that i had a grand am (93) that would not start.
well, i changed the crank sensor the first time and it popped but did not start, i changed it a second time and it ran perfect for about 20sec. i dont just want to keep replacing them, and gain 20sec of driving time each time. when it runs it will run perfect but then just cut out, no stumbling or anything.
what do you think could be the problem?
i got this car for $500 and its in perfect condition, if i could just find out what the hell is wrong with it, it will be a great car.
HELP ME PLEASE

BTW: it has the 3.3L engine
__________________

95gt lazer red (98 cobra clone)
Rice Haters Club Member #116
sn95gt19 is offline   Reply With Quote
Old 03-12-2003, 04:03 PM   #2
lx5091
Registered Member
 
lx5091's Avatar
 
Join Date: Nov 2001
Location: Fall River, MA
Posts: 467
Default

where abouts do you live, I thnk I know who sold you that car! haha! who I'm thinking of works in Norton, MA probably lives around there.
__________________
'02 Explorer XLT 4.0L --Nice Vehicle

'97 Saturn SL1--Soon to be ditched for a Ford!
lx5091 is offline   Reply With Quote
Old 03-12-2003, 04:34 PM   #3
sn95gt19
motors done......woohooo
 
Join Date: Mar 2002
Posts: 799
Default

NEW LENOX, IL a couple 100 miles off
__________________

95gt lazer red (98 cobra clone)
Rice Haters Club Member #116
sn95gt19 is offline   Reply With Quote
Old 03-12-2003, 06:21 PM   #4
srv1
Get down.....
 
srv1's Avatar
 
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
Default Re: darn work car problem again

Quote:
Originally posted by sn95gt19
ok i posted awhile ago that i had a grand am (93) that would not start.
well, i changed the crank sensor the first time and it popped but did not start, i changed it a second time and it ran perfect for about 20sec. i dont just want to keep replacing them, and gain 20sec of driving time each time. when it runs it will run perfect but then just cut out, no stumbling or anything.
what do you think could be the problem?
i got this car for $500 and its in perfect condition, if i could just find out what the hell is wrong with it, it will be a great car.
HELP ME PLEASE

BTW: it has the 3.3L engine
Well Sn, i maybe can help you. I am not sure what you know but lets try this. When the car stall and wont start again, does it have spark? answer this and i will walk you through the rest.

James
__________________
Cobra brakes are on! Finally.....
------------------------------------------------
srv1 is offline   Reply With Quote
Old 03-12-2003, 11:43 PM   #5
sn95gt19
motors done......woohooo
 
Join Date: Mar 2002
Posts: 799
Default

no it doesnt have spark...i know thats why it doesnt restart.

its definitely a spark problem, i had the coil module tested (ok) and the coils tested (also ok) i have also replaced the computer, i was told that the wires from the crank sensor to the coil module must have a break in them somewhere, so i ran new wires and tomorrow i am going to get a new crank sensor and see what happens.

i have narrowed it down to something shorting out the crank sensor.

do you have any other ideas?

thanks
__________________

95gt lazer red (98 cobra clone)
Rice Haters Club Member #116
sn95gt19 is offline   Reply With Quote
Old 03-14-2003, 08:03 PM   #6
srv1
Get down.....
 
srv1's Avatar
 
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
Default

Quote:
Originally posted by sn95gt19
no it doesnt have spark...i know thats why it doesnt restart.

its definitely a spark problem, i had the coil module tested (ok) and the coils tested (also ok) i have also replaced the computer, i was told that the wires from the crank sensor to the coil module must have a break in them somewhere, so i ran new wires and tomorrow i am going to get a new crank sensor and see what happens.

i have narrowed it down to something shorting out the crank sensor.

do you have any other ideas?

thanks
so what happened when you put the new cranks sensor in?
__________________
Cobra brakes are on! Finally.....
------------------------------------------------
srv1 is offline   Reply With Quote
Old 03-15-2003, 03:17 PM   #7
sn95gt19
motors done......woohooo
 
Join Date: Mar 2002
Posts: 799
Default

been too lazy.......going out to do it in 15 minutes. ill let you know
__________________

95gt lazer red (98 cobra clone)
Rice Haters Club Member #116
sn95gt19 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1988 2.3 Conv Mustang problem with Fan???? Mustang 2.3 Conv Small Ponies 0 05-20-2003 07:58 PM
Cold start problem ... 89 Mustang LX bball88 Small Ponies 3 01-19-2002 03:31 PM
Surging Problem - Help Lawless Windsor Power 32 08-19-2001 10:57 PM
94 Convertible Top Problem BigJohn9789 Windsor Power 2 08-15-2001 09:58 PM
HELP : Headlight switch problem! Gautam Blue Oval Lounge 1 01-12-2001 01:17 PM


All times are GMT -5. The time now is 08:55 PM.


SEARCH