 
                    
                  
                    © Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
                    
                  
                MustangWorks.com is designed and hosted by Aero3 Media.
|  10-16-2003, 11:20 AM | #1 | 
| Registered Member Join Date: Sep 2002 Location: Ponte Vedra Beach, FL 
					Posts: 122
				 |  Stingy Dyno? Looking for some input on two dyno experiences, on two different dyno's.  After I had the base Vortech kit installed on my car I had it dyno on I believe was a DynoJet and I had it at the track.  Car dyno'd at 313 rwhp and the car ran a 105 mph quarter mile at about 13.5 (street tires and very bad 60' time).  This hp # matched practically spot on with the Analyzer.  Since then I have done upgrades which have led to better track #'s.  The odd thing is my most recent upgrade was a Dyno Tune, 90 mm MAS and 42 pound injectors.  This was done on a Mustang Dyno and the numbers were dramatically lower than I expected.  Car dyno'ed at 323 wrhp, 327 rwtrq.  Just a tiny bit over the stock Vortech install (and much lower torque #).  However I took the car to the track and it ran about what I expected with the upgrades, 12.7@110 mph.  I was told that the Mustang Dyno typically generates more conservative #'s.  When I plug my #'s into the analyzer I come up with 400 hp (car has a track weight of 3825 with my big behind in it).  Has anyone experienced something like this before or any comments on a Mustang Dyno? 1. "Stock" Vortech: 105 mph@13.5, DynoJet at 313 rwhp, 369 rwtrq. 2. Diablo Custom Chip & PowerPipe: 108 mph@13.0, no dyno #'s. 3. Dyno tune, 90 mm MAS & 42 pound injectors: 110 mph@12.7, Mustang Dyno 323 rwhp, 327 rwtrq 
				__________________ '00 GT 5-spd Vortech S-Trim 3.1" Pulley Paxton Air-to-Air Aftercooler 90 mm MAS 42 lb injectors Cobra Fuel Pump 70 mm AccuFab Throttlebody C & L Intake Plenum 2 1/2" X-pipes Anderson PowerPipe MagnaFlow Mufflers Diablo Custom Chip 3.73's Steeda Lower Control Arms 358 rwhp (Mustang Dyno) New Track Times Coming Soon | 
|   |   | 
|  10-16-2003, 10:46 PM | #2 | 
| Registered Member Join Date: Apr 2002 Location: racine ,wi 
					Posts: 691
				 |   mustang dynos are better for tuning and they give more of a real world ##S and dynojets give a higher number but all in all you r is making the same power on the dyno.. I would not worry about how much your car makes on the dyno but more what it runs at the track and just us the dyno for tuning dyno #S are not important unless your racing the dyno or just need something to brag about 
				__________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________ | 
|   |   | 
|  10-17-2003, 09:45 PM | #3 | 
| Registered Member Join Date: Sep 2002 Location: Ponte Vedra Beach, FL 
					Posts: 122
				 |   Thanks explicitone.  You validated what I was told at the shop.  But I do have to confess I would have liked the little sheet of paper with the pretty chart on it to have had larger numbers to brag about   . 
				__________________ '00 GT 5-spd Vortech S-Trim 3.1" Pulley Paxton Air-to-Air Aftercooler 90 mm MAS 42 lb injectors Cobra Fuel Pump 70 mm AccuFab Throttlebody C & L Intake Plenum 2 1/2" X-pipes Anderson PowerPipe MagnaFlow Mufflers Diablo Custom Chip 3.73's Steeda Lower Control Arms 358 rwhp (Mustang Dyno) New Track Times Coming Soon | 
|   |   | 
|  10-18-2003, 04:24 AM | #4 | |
| Registered Member Join Date: Apr 2002 Location: racine ,wi 
					Posts: 691
				 |   Quote: 
   but look at it this way if your in to drag racing can get those little slips to brag about and that to me makes all the differance 
				__________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________ | |
|   |   | 
|  10-22-2003, 01:42 PM | #5 | 
| I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA 
					Posts: 4,315
				 |   The tracks the only thing that ever tells the truth, the dyno is always full of ****. 
				__________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others. | 
|   |   | 
|  | 
| 
 | 
 | 
|  Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| Darius' dyno numbers | drudis | Power Adders | 7 | 08-27-2004 04:09 PM | 
| disapionted with dyno numbers | 302crew | Windsor Power | 7 | 08-13-2003 10:22 AM | 
| My latest dyno adventures | XR1stang | Blue Oval Lounge | 6 | 08-01-2003 04:00 PM | 
| Dyno resource website | 97mustangcobrad | Racer's Club House | 0 | 11-08-2001 11:38 AM | 
 
                    
                  