mustang belt ?????????

HAITHAM · 08-06-2001, 11:34 PM

Can I use a belt with 7 lanes(the inner face of the belt divided into 7 lines).

*normally mustang belts coming with 6 lanes.

------------------
94 COBRA # 926/5009
TFS track heat heads (ported), Cobra intake (ported), 24# Injectors, 3/8" Phenolic spacer, E303 Cam, TFS 1.7 rr
BBK 1 5/8" headers, BBK 65mm TB, Pro-M 80mm MAS, PIH kit w/ A9L computer, FMS 3.55 ratio
BBK 190 lph fuel pump, Paxton fpr, MSD'S, March Pulley's, Pro-5 tower power shifter, Autometer shift light (5600),
Intellitronix Air/Fuel gauge, Eibach Sportline Springs, Tokico 5-way adjustable, Granatelli Motorsport Subframe

91evilstang · 08-06-2001, 11:53 PM

Ihave heard of guys using blowers like kenny bell that use the same belt as the accesories up gradeing to a 10 rib belt but it requires custom pullys and is expensive.do you have a belt slipping problem now?If so mabie you should get a new tensioner auto zone has them.or mabie just a shorter belt.just suggestions.

------------------
91GT Flowmaster 2 chambers,off road H pipe,mac equalength headers,F303 cam,high lift valve springs ,svo 1.6 roller rockers,19*timing,410's,BBK cold air kit,hurst shifter, Pullys,World class T5 MSD 6al box. Ran 13.5@101 with stock headers and air box.

HAITHAM · 08-07-2001, 12:06 AM

Actually I didn't found the size of the belt with 6-rib, so I went to the 7-rib, can I trim 1-rib ??????

08-06-2001, 11:34 PM	#1
HAITHAM Registered Member Join Date: Jun 2000 Location: Saudi Arabia Posts: 130	mustang belt ????????? Can I use a belt with 7 lanes(the inner face of the belt divided into 7 lines). *normally mustang belts coming with 6 lanes. ------------------ 94 COBRA # 926/5009 TFS track heat heads (ported), Cobra intake (ported), 24# Injectors, 3/8" Phenolic spacer, E303 Cam, TFS 1.7 rr BBK 1 5/8" headers, BBK 65mm TB, Pro-M 80mm MAS, PIH kit w/ A9L computer, FMS 3.55 ratio BBK 190 lph fuel pump, Paxton fpr, MSD'S, March Pulley's, Pro-5 tower power shifter, Autometer shift light (5600), Intellitronix Air/Fuel gauge, Eibach Sportline Springs, Tokico 5-way adjustable, Granatelli Motorsport Subframe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Yellow Mustang Stampede TULSA OK August 17	stylin99	Ford Show & Go	2	11-09-2004 11:19 PM
351W belt routing	Ieatcamaros	Windsor Power	1	05-02-2003 08:15 PM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
New Mustang	Mustang[RIP]	Classic Mustangs	2	10-17-2001 01:50 AM

08-06-2001, 11:53 PM	#2
91evilstang Registered Member Join Date: Mar 2001 Location: lafayette IN USA Posts: 48	Ihave heard of guys using blowers like kenny bell that use the same belt as the accesories up gradeing to a 10 rib belt but it requires custom pullys and is expensive.do you have a belt slipping problem now?If so mabie you should get a new tensioner auto zone has them.or mabie just a shorter belt.just suggestions. ------------------ 91GT Flowmaster 2 chambers,off road H pipe,mac equalength headers,F303 cam,high lift valve springs ,svo 1.6 roller rockers,19*timing,410's,BBK cold air kit,hurst shifter, Pullys,World class T5 MSD 6al box. Ran 13.5@101 with stock headers and air box.

08-07-2001, 12:06 AM	#3
HAITHAM Registered Member Join Date: Jun 2000 Location: Saudi Arabia Posts: 130	Actually I didn't found the size of the belt with 6-rib, so I went to the 7-rib, can I trim 1-rib ??????