© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
04-13-2007, 12:09 PM | #1 |
black and blue
Join Date: May 2005
Location: cinci.
Posts: 84
|
do i need this?
so i was told that since i will be getting a tremec tko500 for my car that i will also need a new bellhousing to go with it. and also, i heard that i will need a different yoke for it too...do i really need these things or will what i have work for it? and if i do, does anyone know part numbers?
thanks, -zach
__________________
'93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach |
04-14-2007, 10:14 AM | #2 |
Registered Member
Join Date: Apr 1999
Location: Cincinnati,OH
Posts: 1,511
|
Re: do i need this?
You'll need the bell housing and the yoke. And while you're at it you may as well upgrade to the 26 spline input shaft and clutch. Personally I would look at getting a built t-5 from ProMotion
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. *Sold* 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page |
04-14-2007, 11:59 AM | #3 |
black and blue
Join Date: May 2005
Location: cinci.
Posts: 84
|
Re: do i need this?
how hard is it to change to the 26 spline? and do you know where i can find the bell housing and yoke?
__________________
'93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach |
04-14-2007, 01:33 PM | #4 |
Registered Member
Join Date: Apr 1999
Location: Cincinnati,OH
Posts: 1,511
|
Re: do i need this?
You can get the tko500 with the 26 spline input shaft so all you have to do is change the clutch. You can get the bell housing and yoke from promotion as well as many other places. I don't know if you're dead set on a tko but you can get a built t-5 that will handle more power, cheaper than the tko.
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. *Sold* 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page |
04-14-2007, 03:02 PM | #5 |
black and blue
Join Date: May 2005
Location: cinci.
Posts: 84
|
Re: do i need this?
i found it all! lol thanks.
__________________
'93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach |
04-14-2007, 03:32 PM | #6 |
black and blue
Join Date: May 2005
Location: cinci.
Posts: 84
|
Re: do i need this?
what are the benefits to having the 26 spline rather than the 10 spline?
__________________
'93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach |
|
|