![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Jan 2001
Location: clawson, mi.
Posts: 32
|
![]() Anyone put a 351W injected in a Fox body GT?
I keep getting "don't rebuild the 302, put a 351W in it' Just how much is involved in that kind of conversion? I read a trans mount change, motor mounts and a higher hood...but from there? and....which 351W is the best out of which vehicle series for a close to bolt-in switch? e.i truck, Mercury, LTD ? |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: May 2002
Location: Portland, OR
Posts: 37
|
![]() My very first car was a 1980 that I put a 351W in. I was 14 at the time, and everything bolted right in (as far as I can remember - 14 was a while ago).
You could actually probably use the same tranny mount, as the 351W and 302 are the same basic block - only difference is the deck height of the 351W. It's longer and that's where you get the added displacement (and also why you will want added hood clearance). In fact, I used a double hump crossmember from a GT, then maodified the holes to match my toploader. You'll deffinitely want some good headers, fortunately there are several people now that make headers for this conversion. the only real problem I ever had was with cooling. Invest in a good radiator and electric fan. You'll need the right oil pan too. Other than that, it's a piece of cake. Any 351W block should be fine as far as I know. Like I said - I did mine a while ago, so I may have 'forgotten' a couple things. |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Feb 2001
Location: Berkshire County - Massachusetts
Posts: 735
|
![]() I just did this. Here's what you'll need if you want to run EFI:
1) Lower intake manifold for a 351W, almost all the uppers from a 5.0 will work. 2) Bigger injectors (24-30 lb., depending on the app.) 3) Better fuel delivery to feed the injectors 4) 351W Conv. oil pan 5) 351W swap headers. You can use the 5.0 H-pip but remember that the 351 is appx. 1.5 inches wider than a 302 so the H-pipe will need to be bent. 6) Good cooling system (I recommend using the engine mounted fan and shroud.....if you want to know why, PM me) 7) Taller valve covers (or have baffle plate removed) if you're using roller rockers. 8) 351W Distributor 9) Good engine mounts (I'm using Energy Suspension) 10) A cowl hood Good luck and let me know if you have more questions.
__________________
Red 1993 GT Street Machine Best E.T. - 12.41/Best MPH = 108 Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Jun 2002
Location: manassas, va
Posts: 186
|
![]() hey what about the front accesory engine brackets? if you have a/c doesn't it interfere with the hood, even a cowl, because it is in the front of the motor not in the back where the cowl is?
__________________
1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided |
![]() |
![]() |
![]() |
#5 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
![]() I did a 351-W in a Fox body... Zerphyr Z-7.
See my homepage for pictures. Check out www.alternativeauto.com they have a write-up.
__________________
Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need Throttle Body & Idle Conrol Valve Info | BigBobsL | Windsor Power | 2 | 02-10-2004 01:16 AM |
351w or 347 stroker? which is better? | BLACK85GT | Windsor Power | 55 | 12-21-2002 06:52 PM |
351W heads on 289 stock engine | sleeperstang | Classic Mustangs | 5 | 11-21-2002 08:35 PM |
Saleen Body Kits - good or bad? | subterfuge | Modular Madness | 5 | 06-26-2002 10:55 AM |
Please help w/Throttle Body install question?? | Ersel | Modular Madness | 1 | 07-08-2000 06:04 PM |