![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() What needs to be done to upgrade to a electronic ignition in a 68. I know the ignition is really holding the motor back and we need to loose the points too. How much is this? What has to be done. I'm sooooooooooooooo clueless on old cars.
Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees) |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Feb 1999
Posts: 102
|
![]() The easiest thing is the Pertronix ignition from most mustang places about $60. In reading several boards for several years I've only heard one complaint about this unit and many reports of success. About a 20 minute install. Basically replaces the points with an electronic trigger to fire the coil. You can also upgrade the coil and plug wires for more gusto. You can also install a junk yard ford duraspark ignition http://www.geocities.com/mustangsteve66/conversion.html
For bragging rights or racing action, you can step up to an MSD ignition. Personally, I still have points, but am considering the Pertronix. (If I ever finish painting and putting the car back together.) |
![]() |
![]() |
![]() |
#3 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Can't you run an MSD box with the petronix?
Thanks Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees) |
![]() |
![]() |
![]() |
#4 |
IRAQ VET
Join Date: Feb 2000
Location: high desert California
Posts: 1,480
|
![]() I tried the different electronic ignitions and my car just never ran right. Even after I put on the msd. The msd helped but the car just never fired right. So I spent the money and got the msd distirbutor and the car livened up and ran like it is supposed to.
------------------ 69 428 cobra jet:bored .030, forged aluminum pistons, C & A rings, Engle cam, Edelbrock intake, 750 cmf carb, Hooker headers, March pullies, all ignition componets MSD, Holley 7psi fuel pump, Art Carr C-6, TCI torque converter, 4:30 gears, H pipe, subframe connectors, lift bars. I aso have a stock 96 GT. |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Jun 2000
Location: Sherman, Texas
Posts: 188
|
![]() I put the Pertronix thingy in a couple of years ago and it is great. Took me about 15 minutes to do it. Best 65 bucks I ever spent. E.
|
![]() |
![]() |
![]() |
#6 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Can't I run an MSD6a with the petronix?
Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees) |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Oct 1998
Location: Houston, TX, USA
Posts: 380
|
![]() I think you can run the msd with the petronix but I would call summits tech dept and ask for sure. I just put a 6al on a 72 with a duraspark distributor so you could always get a duraspark unit from a junkyard and use it too.
|
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Jan 2000
Location: Concord,CA
Posts: 86
|
![]() Go to www.msdignition.com/ and check out
the instruction downloads. The have diagrams on how tio wire a magnetic trigger to the MSD ignitions. Regards BillGear www.289mustang.com |
![]() |
![]() |
![]() |
#9 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Where did you guys get your petronix ignition from? I want to order one.
Thanks, Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees) |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Sep 1998
Location: Oviedo, FL
Posts: 992
|
![]() Look in Mustang Monthly. They always have someone advertising it. Here in one I have handy Virginia Classic Mustang's ad lists them for $61.00. Good price.
|
![]() |
![]() |
![]() |
#11 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Could you give me the phone # or how I could order it. I don't have one of those magazines, and I have no clue even where to buy one...
Thanks, Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees) |
![]() |
![]() |
![]() |
#12 |
Registered Member
Join Date: Feb 1999
Posts: 102
|
![]() Virginia Classics does not have a web page unlike most of the big mustang places.
NPD should have the pertronix http://www.npdlink.com/flash/movie.html Or Mustang Plus http://www.mustangsplus.com/ There are several other mustang places identifiable by a web search. |
![]() |
![]() |
![]() |
#13 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
![]() Mustang Plus (on the web) has Petronix ignitors for $61.95 and "Flame Thrower" coils (40,000 volts) for #28.95. My main advice is to avoid Mallory ignition systems. I have a Unilite system which required replacement of the "electronic module" after 18,000 miles. The guy at the parts store said " That's longer than usual". If i did it over, I'd use all MSD stuff with a magnetic pick up.
Rev ------------------ '66 Coupe, 306, windage tray, TRW flat tops, 351W heads,pocket ported, 268 CC hydraulic cam, R tip R's, Edelbrock Performer, 600 CFM Holley vac. secs., Mallory Unilite, coil, fuel pump, Tri-Y headers, 2 1/2 " custom pipes, 3 chamber Flows, stock C-4, 3.25 Currie built 8" rear, March under drive pulleys, 13.97 e.t., 100.1 mph 1/4 mi. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Electronic Ignition? | 1969Mach1 | Classic Mustangs | 9 | 08-15-2002 12:56 PM |
electronic ignition on mustang 67 (how to?) | sanka | Classic Mustangs | 2 | 05-23-2002 11:15 AM |
Ignition frabrication...needs some ideas | 1989_351W | Windsor Power | 0 | 08-11-2001 04:52 PM |
Electronic Ignition? | jord | Classic Mustangs | 3 | 05-05-1999 03:43 AM |
Electronic Ignition | Weyne | Classic Mustangs | 3 | 04-07-1999 09:15 PM |