MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-26-2004, 11:39 PM   #1
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Mustang falling on face after mods installed

I have a SN95 with which i just installed some mods. I installed P heads w/1.6 rr's, a typhoon intake, a crane 2030 cam, 30lb injectors, 30lb calibrated MAF, shorties, bassani o/r x-pipe, and mac pro dumps. The car has the smog pump and egr removed. The car had some trouble firing up initially, but would idle really rough with some feathering of the throttle. Now, after some adjustments with timing, the car will not even fire up. Everything turns over well, and the car even starts to run under its own power, but quickly falls on its face. Does anyone have any trouble shooting suggestions for me?
procharge94 is offline   Reply With Quote
Old 10-27-2004, 01:26 AM   #2
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Mustang falling on face after mods installed

I also forgot to mention that I am still running the stock FPR. I also still have the stock ECU.

Last edited by procharge94; 10-27-2004 at 07:00 AM..
procharge94 is offline   Reply With Quote
Old 10-27-2004, 10:07 AM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: Mustang falling on face after mods installed

Ok here is your problem. You are running 38psi on 30# injectors wich is making your engine run pig rich.

30 pound injectors are really too big for your light mods. You are going to have to turn your fuel pressure way down wich means you need an adjustable fuel pressure regulator. 24# injectors can put over 400HP to the wheels on an all motor set-up.

Double check your firing order etc...

You are way over-injected and when you add that to the crappy SN computer, IMO there lies your problem.

30# injectors car support 400HP at only 36 psi.

Good luck,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 10-27-2004, 11:25 AM   #4
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Mustang falling on face after mods installed

So how far back would you recommend I set my fuel pressure. An adjustable FPR is in the mail, but like always, did not arrive in time. I just need to find some way to get the car driveable before Friday afternoon. I have to leave town and this is my daily driver.
procharge94 is offline   Reply With Quote
Old 10-27-2004, 11:36 AM   #5
Scrapla
Registered Member
 
Scrapla's Avatar
 
Join Date: Apr 2002
Location: Florida
Posts: 532
Default Re: Mustang falling on face after mods installed

Well re install the stockers or goto a scrap yard with a buddy and pull some injectors to get you by if the package doesnt arrive in time.
__________________
90gt 347 and some bolt ons :-)


RICE HATERS MEMBER #73
Scrapla is offline   Reply With Quote
Old 10-27-2004, 11:44 AM   #6
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Mustang falling on face after mods installed

I would reinstall the stock injectors, but two of them are no longer useable, don't ask............. I really think the ECU will eventually learn that the new injectors are much larger and start cutting back on the amount of injector spray. My buddy used to run 30lb injectors in his '86. As for the junkyard route, the only junkyard in Gainesville is mainly just a car graveyard. The cars in there are absolutely useless. There is very little salvagable parts.
procharge94 is offline   Reply With Quote
Old 10-28-2004, 03:42 AM   #7
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: Mustang falling on face after mods installed

I fixed the issue, I was hosed by an Ebay seller. The seller sent me the wrong injectors, claiming the injector were an "older style" which would explain the odd color. I did some research and found out that the seller shipped me 16lb injectors. That was the entire issue. After I borrowed some 30lb injectors, the car started up and would hold an idle.

This is not the first time something like this has occured, there are some shady-ass people out there...............
procharge94 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Excellent Mustang "FIX" Post (true classic!) PKRWUD Blue Oval Lounge 19 06-27-2002 12:03 AM
AOD mustang with mods HiFlow5 0 Stang Stories 4 07-09-2001 02:00 PM
89-Mustang pulling trailer -vs- 2000 Mustang Five0 Stang Stories 7 04-01-2001 02:50 AM
Salaeen, Shelby, Cobra please define these for me. Taqus Blue Oval Lounge 3 01-17-2001 02:39 AM
Year 2000 Mustang GT Mods thebean311 Modular Madness 3 05-18-2000 08:58 AM


All times are GMT -5. The time now is 08:06 AM.


SEARCH