![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Mar 2005
Posts: 7
|
![]() Ok so no takers on the mass air meter, who can tell me what meter I should go with? I have no clue, and as you can tell I have spent alot of money figuring that out. What I got is a 1990 302 / 347 with stock throttle body, ford racing mass air conversion computer, and mass air to run 19lb injectors, compression 10:1, intake and exhaust 187, lobe separation 108, dynomax full length headers, AOD tranny, 4:10 pinion, and this Bronco will not pull hills, What do I do?
What I would like to do Is Lite up 33"s on a Green light, or just pull a hill with out it acting like its going to die would be Ok! |
![]() |
![]() |
![]() |
#2 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
![]() why not just buy a mass air meter thats calibrated for 19lb injectors then? the computer doesnt care about displacement ...you say you are runnin a 347? or you have a 302? what heads do you have ...id upgrade the injectors if you have nice heads on a 347...
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Mar 2005
Posts: 7
|
![]() Origianal 302 stroked to a 347, its a 1990 that was configured for speed density, so I had to buy a conversion to mass air. After spending that money I was a little upset when it still ran bad, so I looked deeper into it and found out it was running way lean.
So I have been told that I need at least 30lb injectors but to do that I need to upgrade the Mass Air to accomidate that. My question is will that be enough for a 347 and if so what Sensor should I go with? I don't want to buy all this and find out it still runs lean. What do you think? What is common on a 347 for injectors/mass air sensor. Thank you for your help! Mark |
![]() |
![]() |
![]() |
#4 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
![]() is it a 347 with stock heads? ..if so you can still run the 19lb'ers no problem - there are a bunch of mass air meters out there it depends on how deep your wallet is ...i really wouldnt go all out on just a meter though
im not sure on what brands are the best ..i had a pro-m and it was ok i guess |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Mar 2005
Posts: 7
|
![]() well you are the first one to say that and thank you for saying it. I was out looking for a bore scope cause alot of my freinds were saying that I have burnt holes in the pistons by now! So 19lb injectors with stock 302 heads on a 347 is ok?
|
![]() |
![]() |
![]() |
#6 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
![]() should run no problem with 19's
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Building a stroker motor | Mustang_289 | Windsor Power | 4 | 02-17-2005 12:46 PM |
Blown Stroker Computer Help | RabidPony | Modular Madness | 10 | 02-07-2004 11:56 PM |
'super' stroker vs 'budget' stroker | mike5p01 | Windsor Power | 4 | 10-11-2003 10:11 PM |
351w or 347 stroker? which is better? | BLACK85GT | Windsor Power | 55 | 12-21-2002 06:52 PM |
Decided to build a stroker, but where do I start? | WhiteLX | Windsor Power | 5 | 12-16-2002 10:35 AM |