Burnt Plug Wire

[rwhite65]

Ok, so I am still having some clearance issues with my World Products Windsor Sr. Aluminum heads and my ******* headers. Although I have not confirmed it, I am fairly sure I smoked a plug wire already, and I just put these on 2 months ago. Problem is, I can't find a plug boot that will go on the plug without touching the header. I will post pics later. I am also gonna call World products and gripe (again).

Any one have suggestions? And I am already running the dang shorty accel plugs.
thanks
Ryan

[rwhite65]

These are the Taylor Wires that they recommended, I chose right angle this time around.

[rwhite65]

These are the Taylor Wires that they recommended, I chose right angle this time around.

[bigblocktisdale]

could you route that plug wire in from the bottom? would that give you more clearence?

[rwhite65]

Originally Posted by bigblocktisdale

could you route that plug wire in from the bottom? would that give you more clearence?

no, the plug is angled perfectly so it exits right towards the middle of that tube. It might be worse doing that actually.

First, I just want to let everyone know that World Products tech help SUCKS.....and TAYLOR wires was very good. The guy from World acted like this is the first time he has ever heard of this. he dumped me on Taylor and they advised they have a lower profile plu boot, which they are sending me free of charge to see if it will work. So here are my options and the order I hope to go in.


1 - use the new boot and the boot protectors posted in this thread.

2 - Use a big F'n pry bar and get pissed

3 - pull the header off and have Midwest (local go fast fab shop)hook me up.

I would have already done #3, but I dont want to extend that tube out any, it is a close fit getting it in there with the engine in as it is.

[rwhite65]

I just noticed I messed up and double posted those pics, if a mod wants to delete a set out, feel free.

[bailey_57]

i used to burn plug wires like a mother but my buddy recommended these insulators that go around the plug wire. believe it or not i bought them off the shelf at autozone. they are like 40 bucks. worth it after you smoke a couple sets of wires.

[408gt91]

i can tell you right now just by looking at those pics its those headers.the dont come out of the flange far enough before they bend.they just bend out.my bbk's come out about 2" then bend.
looks like you have room for a wider header too.

[rwhite65]

Originally Posted by 408gt91

i can tell you right now just by looking at those pics its those headers.the dont come out of the flange far enough before they bend.they just bend out.my bbk's come out about 2" then bend.
looks like you have room for a wider header too.

BBK for what combo? The new plug boots clear, but didnt fix the running issue.

[408gt91]

these are 351 for a fox but you can get a header for your car that is not so close to the heads like that.jba makes a nice mid header or long tube for your year.those headers must be for the stock heads,i know alot of fox owners have that problem when they put a aftermarket header on a stock head.thers alot of companies that make off the shelf headers for your car that will fit and are not so close to the head.mustangs unlimited has a complete catologe on your body style.edelbrock makes headers for it too.