94 cobra idle

94snake · 01-31-2008, 03:49 PM

ok folks my car idles great at a complete stop, but when im driving down the road and i push the clutch in to slow down the rpm's jump up to 1400-1500. It wont idle until i come to a complete stop, then the rpm's jump str8 to normal 800 idle speed. Also i should add that i do have an IAC on there from a 3.8L v6 stang, same design and mount...is this the culprit?... i have looked all over for vaccum leaks so far have found none!! TPS is dialed in .98 of a volt and timing is at 12... any suggestions please this is driving me crazy?? THANX

USMC302 · 02-05-2008, 01:02 AM

The IAC could be it, try swapping out or putting a vacuum gauge on there, you should be pulling around 12-14in at idle....Let us know.

94snake · 02-06-2008, 02:26 PM

Quote:

Originally Posted by USMC302

The IAC could be it, try swapping out or putting a vacuum gauge on there, you should be pulling around 12-14in at idle....Let us know.

Ok i am gonna swap out the IAC for the right 1...... with the vacuum guage, what do i hook it up to??? thanx for your reply!

USMC302 · 02-06-2008, 11:35 PM

You can hook it up to any of the ports on the vacuum tree on the back of the intake, or look for a closed off port on the firewall to try. Good luck.

94snake · 02-19-2008, 06:11 PM

Quote:

Originally Posted by USMC302

You can hook it up to any of the ports on the vacuum tree on the back of the intake, or look for a closed off port on the firewall to try. Good luck.

Well i finally got the right part for the car and all is well..... thanx USMC!!!! as soon as i get subframe connectors i will be rippin the 8the mile with my new 2.02 edel

brock heads!!!!

01-31-2008, 03:49 PM	#1
94snake Registered Member Join Date: Nov 2002 Location: Panama City Fl. Posts: 152	94 cobra idle ok folks my car idles great at a complete stop, but when im driving down the road and i push the clutch in to slow down the rpm's jump up to 1400-1500. It wont idle until i come to a complete stop, then the rpm's jump str8 to normal 800 idle speed. Also i should add that i do have an IAC on there from a 3.8L v6 stang, same design and mount...is this the culprit?... i have looked all over for vaccum leaks so far have found none!! TPS is dialed in .98 of a volt and timing is at 12... any suggestions please this is driving me crazy?? THANX

02-05-2008, 01:02 AM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: 94 cobra idle The IAC could be it, try swapping out or putting a vacuum gauge on there, you should be pulling around 12-14in at idle....Let us know. __________________

02-06-2008, 11:35 PM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: 94 cobra idle You can hook it up to any of the ports on the vacuum tree on the back of the intake, or look for a closed off port on the firewall to try. Good luck. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hey 93 cobra guys! thinking of buying a cobra tell what you think with pics	scootro	Special Production	4	06-14-2005 09:39 PM
99 SVO Cobra wheels on a fow with 13" Cobra brakes. Will it work?	2FastLX	Windsor Power	0	01-14-2002 06:22 PM
Weird idle problems Idle’s fine but running ruff	Tony91LX	Windsor Power	0	10-08-2001 07:06 AM
Rode in a brand new 2001 Cobra....1st time in a cobra	84stangLX	Stang Stories	4	05-02-2001 10:39 AM
Safety Recall for 1999 Cobra and 2000 Cobra R	JoeJ	Special Production	0	04-13-2001 08:18 PM