© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
11-18-2007, 09:24 AM | #1 |
Registered Member
Join Date: Nov 2007
Posts: 1
|
Installing TransGo Shift Kit in AOD - problems
Hello,
i am Patrick from Landau/Germany. I own a 66 Mustang Coupe with a 5.0HO and AOD Transmission. Now i wanted to install a TransGo SK AOD-H Shift Kit. But i have several problems with installation and i hope anybody here can help me. In Germany it is really hard to become technical help for this transmission or the shift kit. To the questions: I have a problem with the Step 3, 4, 6, 7 and 8. I hope you can help me. Step 3 Checkball Locations Here i should replace the checkball #6 with a orifice valve and a spring. But on position #6 was no checkball in my Valve Body. Should i install the valve anyway? Step 4 Separator Plate Here i should drill bigger holes in position C, B, E & K. E has orignally 4.8mm, K 3.1mm and i should drill 1.4mm. What should i do, the holes are to wide? Also i should drill C with 1.4mm and after this install a cotter pin in the hole. Is this right? Hole C is original 0.8mm. Step 6 3-4 Accmulator: Here i should install a NEW spring on the piston. But there was NO spring originally on the piston. In my ATSG handbook there is a note that there can be a spring on the piston or not, depend on the model of the aod Should i install the spring, even tough there were originally no spring installed? Step 7 2-3 Accumulator Piston Here i should install a new seal on the piston if there is a plastic piston. If there is a aluminium piston i shouldn`t install the new seal. I have a plastic piston, so i installed the seal. The new seal is from rubber, the old was an open teflon seal. Now it is difficult to install the piston, with the teflon seal it slides easy in the transmission, with the new seal it is really tight. I can not move it with my hands. Is this ok? Step 8 Overdrive Servo: Here is should install a washer between the cover and the piston. I can not fasten the washer, it`s slacky between the cover and piston. Ok? Best Regards Patrick |
05-16-2008, 12:53 AM | #2 |
Registered Member
Join Date: Jun 2000
Location: Tonawanda,NY
Posts: 71
|
Re: Installing TransGo Shift Kit in AOD - problems
Click Click Racing might turn up more help. lots of good AOD tech there
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
transgo shift kit | 91lxstang | Windsor Power | 4 | 02-03-2003 05:29 PM |
Transgo shift kits 98 mustang gt | Modmadness01 | Modular Madness | 10 | 08-02-2002 02:02 PM |
Those with a TransGo shift kit... | 90LxDroptop | Windsor Power | 2 | 10-18-2001 08:17 PM |
HELP! Transgo shift kit | 88conv | Windsor Power | 1 | 07-02-2001 11:27 PM |
those with AOD and transgo or any other shift kit | Brian88 | Windsor Power | 10 | 01-18-2001 10:19 PM |