Blowers for carbed fords?

7000rpmisheaven · 06-12-2002, 12:58 PM

The only one i know of is the holley powercharger. How many others are there?

Dark Knight · 06-12-2002, 05:45 PM

paxton makes one... BDS....

RoadWarrior · 06-12-2002, 06:14 PM

You can actually get a carb box from Vortech i think it is. If you get the box you can pretty much bolt up any 5.0L blower. It basically seals the carb in the box and has the air inlet in pretty much the same place as a EFI intake. Looks pretty good.I emailed them about it but i never got a reply. Hope that helps

red82gt · 06-12-2002, 10:50 PM

Procharger also makes a carburetor bonnet and when I emailed them they said that it could be made to work with most of their 5.0 supercharger kits. They don't make a complete kit for the ford 5.0 because a carbed blower is not easy to tune and it's hard to put together a complete kit like they can for a fuelie car. Most of their carb applications are for marine applications but they do make a kit for chevys but they said that it can be done and they will attempt to assist with tech support if I wanted to try it.

Oldschoolpony · 06-13-2002, 12:43 AM

Holley claims their power charger is the shiznit. It is very nice though up to 19 psi on a 302 with the right pulleys. I think Kenny bell(spelled right?) makes one too. High dollar. Holley is the least expensive, Satin finish around 2K saw one at fun ford for 1 k.

Lugos has the sealed boxes in stock, they look like a silver treasure chest. But youll need a treasure chest to buy the set up. Only problem with a holley, Well not a prob. but, Youll definately need a cowl hood.

06-12-2002, 12:58 PM	#1
7000rpmisheaven Registered Member Join Date: Nov 2001 Location: germantown MD Posts: 283	Blowers for carbed fords? The only one i know of is the holley powercharger. How many others are there? __________________ 85 GT 4bbl roller cam 2 ch. Flowmasters, O/R H-pipe Performer intake and carb milodon water pump, FMS 9mm wires, aluminum driveshaft, king cobra clutch

06-12-2002, 05:45 PM	#2
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	paxton makes one... BDS.... __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

06-12-2002, 06:14 PM	#3
RoadWarrior Registered Member Join Date: Apr 2000 Location: Edmonton,Alberta,Canada Posts: 317	You can actually get a carb box from Vortech i think it is. If you get the box you can pretty much bolt up any 5.0L blower. It basically seals the carb in the box and has the air inlet in pretty much the same place as a EFI intake. Looks pretty good.I emailed them about it but i never got a reply. Hope that helps __________________ Fast Company

06-12-2002, 10:50 PM	#4
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	Procharger also makes a carburetor bonnet and when I emailed them they said that it could be made to work with most of their 5.0 supercharger kits. They don't make a complete kit for the ford 5.0 because a carbed blower is not easy to tune and it's hard to put together a complete kit like they can for a fuelie car. Most of their carb applications are for marine applications but they do make a kit for chevys but they said that it can be done and they will attempt to assist with tech support if I wanted to try it. __________________ 393W: AFR 205's, hydraulic roller, TKO600.

06-13-2002, 12:43 AM	#5
Oldschoolpony Registered Member Join Date: Mar 2001 Location: Gainsville,Fl Posts: 229	which is better? Holley claims their power charger is the shiznit. It is very nice though up to 19 psi on a 302 with the right pulleys. I think Kenny bell(spelled right?) makes one too. High dollar. Holley is the least expensive, Satin finish around 2K saw one at fun ford for 1 k. Lugos has the sealed boxes in stock, they look like a silver treasure chest. But youll need a treasure chest to buy the set up. Only problem with a holley, Well not a prob. but, Youll definately need a cowl hood. __________________ http://www.mustangworks.com/cgi-bin/...splay.cgi?1546

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Central Jersey Mustangs & Fords Monthly Cruise Night September 10th!!!	NJStangFan	Ford Show & Go	0	08-27-2002 07:19 AM
Central Jersey Mustangs & Fords 2nd Cruise Night!!!!	NJStangFan	Ford Show & Go	4	08-02-2002 01:16 PM
Why aren't any Fords in NHRA pro stock!!	90'5.0 Conv	Windsor Power	4	08-01-2001 03:41 PM
Where is fords crate motor URL?	stevstum	Windsor Power	1	05-11-2001 07:22 PM
Blowers Blowers Blowers	Skyman	Windsor Power	19	01-17-2001 11:36 AM