

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Aug 2003
Location: Airdrie, Alberta - Canada
Posts: 28
|
![]() Im having a problem with engine power cutting out around 3500 rpm.
When problem occurs, engine speed stays constant around 3500 but will not increase. Engine accelerates normal before this. I have installed new sparkplugs/wires, cap/rotor, ignition module/coil,fuel filter. I have road tested with fuel pressure gauge installed, fuel pressure does not drop when problem occurs (40 psi) Engine is stock - cold air intake,underdrive pulleys, and full exhaust are the only mods. I have also recently installed a new Spec stage 1 clutch. Any ideas or info would be greatly appreciated. |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
![]() unplug the mass air sensor and see if it will rev normally.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
![]() will it rev up if ur not in gear?
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's ![]() 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
![]() |
![]() |
![]() |
#4 |
Moderator
Join Date: Aug 2000
Location: Milan, OH
Posts: 2,699
|
![]() Try cleaning the MAF element with some electrical parts cleaner (not carb or brake parts cleaner).
__________________
Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!" |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Aug 2003
Location: Airdrie, Alberta - Canada
Posts: 28
|
![]() Yes, the engine will always rev normally. The problem occurs underload, the engine will pull hard up to that rpm range. Then it is like you hit a wall - it just won't pull anymore. If I back off the throttle for a second, and then get back on - it will accelerate above that rpm range. Also if I accelerate very gradually it will operate normal, but if I get on the gas hard as if I were racing is when problem occurs. Thank you for reply's
|
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
![]() deff sound like the maf try to clean first
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's ![]() 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
![]() What's the timing set to?
__________________
![]() |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Aug 2003
Location: Airdrie, Alberta - Canada
Posts: 28
|
![]() The timing is set to 10 deg, I have verified that the timing marks are accurate. I have also tried advancing timing at 12 and 14 deg - still no change. I haven't taken it out yet this year, I will clean the MAF and try that hopefully this weekend.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help!!! Engine ticking - loss of power!!!! | Notchback5.0L | Windsor Power | 2 | 06-05-2003 06:22 PM |
Cutting Tips | 1989stanger | Windsor Power | 1 | 11-24-2002 05:37 PM |
Detailing engine bay...What to do about the ugly power steering pump? | Fox Hound | Windsor Power | 2 | 09-28-2002 08:44 AM |
cutting out up top | LX XLR8R | Windsor Power | 0 | 08-20-2001 03:37 PM |
car cutting off | red5.0 | Windsor Power | 4 | 01-05-2001 03:12 PM |