do i need this?

StormsofAres86gt · 04-13-2007, 12:09 PM

so i was told that since i will be getting a tremec tko500 for my car that i will also need a new bellhousing to go with it. and also, i heard that i will need a different yoke for it too...do i really need these things or will what i have work for it? and if i do, does anyone know part numbers?

thanks,

-zach

1989GT · 04-14-2007, 10:14 AM

You'll need the bell housing and the yoke. And while you're at it you may as well upgrade to the 26 spline input shaft and clutch. Personally I would look at getting a built t-5 from ProMotion

StormsofAres86gt · 04-14-2007, 11:59 AM

how hard is it to change to the 26 spline? and do you know where i can find the bell housing and yoke?

1989GT · 04-14-2007, 01:33 PM

You can get the tko500 with the 26 spline input shaft so all you have to do is change the clutch. You can get the bell housing and yoke from promotion as well as many other places. I don't know if you're dead set on a tko but you can get a built t-5 that will handle more power, cheaper than the tko.

StormsofAres86gt · 04-14-2007, 03:02 PM

i found it all! lol thanks.

StormsofAres86gt · 04-14-2007, 03:32 PM

what are the benefits to having the 26 spline rather than the 10 spline?

04-13-2007, 12:09 PM	#1
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	do i need this? so i was told that since i will be getting a tremec tko500 for my car that i will also need a new bellhousing to go with it. and also, i heard that i will need a different yoke for it too...do i really need these things or will what i have work for it? and if i do, does anyone know part numbers? thanks, -zach __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach

04-14-2007, 10:14 AM	#2
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Re: do i need this? You'll need the bell housing and the yoke. And while you're at it you may as well upgrade to the 26 spline input shaft and clutch. Personally I would look at getting a built t-5 from ProMotion __________________ 89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. Sold 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page

04-14-2007, 11:59 AM	#3
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	Re: do i need this? how hard is it to change to the 26 spline? and do you know where i can find the bell housing and yoke? __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach

04-14-2007, 01:33 PM	#4
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Re: do i need this? You can get the tko500 with the 26 spline input shaft so all you have to do is change the clutch. You can get the bell housing and yoke from promotion as well as many other places. I don't know if you're dead set on a tko but you can get a built t-5 that will handle more power, cheaper than the tko. __________________ 89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. Sold 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page

04-14-2007, 03:02 PM	#5
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	Re: do i need this? i found it all! lol thanks. __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach

04-14-2007, 03:32 PM	#6
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	Re: do i need this? what are the benefits to having the 26 spline rather than the 10 spline? __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach