MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Power Adders
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 09-05-2007, 09:19 PM   #1
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default NOVI 1000 big enough???

I have a built 331 stroker with a main support that is just a touch under 10 to 1 compression, worked Canfield heads, big comp cams stroker cam .579/.579 236/248 @.050 and an Edelbrock RPM Performer II intake manifiold etc...

This motor should put out close to 400 at the wheels but now I have decided to put a supercharger on it as well to guarantee a 10 second car.

I want about 490 at the wheels. I figure 6-7 psi of boost should get me there.

Any opinions?
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 09-11-2007, 07:20 AM   #2
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: NOVI 1000 big enough???

IMO you'll need more than 7lbs of boost for 90hp.
__________________
USMC302 is offline   Reply With Quote
Old 09-11-2007, 02:39 PM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: NOVI 1000 big enough???

Quote:
Originally Posted by USMC302 View Post
IMO you'll need more than 7lbs of boost for 90hp.
I dont know this is a very free flowing set-up. I should start small and work my way up up with the boost if it takes 10 or 12 #'s so be it but I dont think it will.

490 RWHP is about 570 flywheel and the Novi 1000 is rated at 650HP flywheel. So I guess what I really need help with is should I start out with a Novi 2000 or S-trim instead. I hate doing things twice.

Thanks,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 09-11-2007, 11:38 PM   #4
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: NOVI 1000 big enough???

Well, I like the fact that the Novi's are self contained but once you get into 12+lbs your gonna have bigger headaches to worry about like belt slip, which means a possible need for cog pullies, which means better blowoff valve, more fuel requirements, stronger brackets, etc...Is your tranny and rearend ready for 500RWHP?
__________________
USMC302 is offline   Reply With Quote
Old 09-13-2007, 10:13 AM   #5
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: NOVI 1000 big enough???

Quote:
Originally Posted by USMC302 View Post
Well, I like the fact that the Novi's are self contained but once you get into 12+lbs your gonna have bigger headaches to worry about like belt slip, which means a possible need for cog pullies, which means better blowoff valve, more fuel requirements, stronger brackets, etc...Is your tranny and rearend ready for 500RWHP?
My rear end is good to go but the tranny is stock. I have have been considering rebuilding it myself with some high end parts.

I am already so deep into this project I am considering just going with a Turbo set-up.

I am still waying my options but either way next season will be a blast.

Thanks for your opinion,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 09-24-2007, 09:16 AM   #6
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: NOVI 1000 big enough???

Well, I just got a free S-trim, off a 95. I'm sending it back to Vortech this month for a rebuild and stronger bearings, I'm going for 20lbs on my little 331 and hoping for the best. Might even spray a 50 shot to keep it cool. Ordered an AFM power pipe and vortech discharge tube with the maxflow race bypass valve. Need brackets and belt and will be evaluating my fuel requirements...Gonna need that damn cage welded in now.
__________________
USMC302 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NOVI 1000 w/130 amp 3G...HELP!! Stang_Crazy Windsor Power 7 09-17-2002 07:44 PM
Problems since I got my Novi 1000 Meatman Windsor Power 4 09-03-2002 10:29 AM
Novi 1000 exgmguy Windsor Power 6 05-08-2002 09:02 AM
Novi 1000 installed Chris_H Windsor Power 9 01-19-2002 10:16 PM
NOVI 1000 Info GTLee Windsor Power 1 01-17-2001 07:20 PM


All times are GMT -5. The time now is 07:24 PM.


SEARCH