Any fast 94/95 GT Convertibles out there???

TROYXTROY · 02-11-2001, 09:22 AM

I have a 95 vert and was wondering if anybody got into the low 12's or high 11's. If yes, what did it take?
Thanks, I was just curious!
-Troy

------------------
1995 GT Convertible
K&N, Steeda G-Trac Stage 3 Suspension, Pro 5.0 Shifter, Kenny Brown Extreme Sub System, Ford Racing Underdrive Pulleys, Cobra R Rims, Steeda Adjustable Clutch Quadrant & Cable

S Howard · 02-11-2001, 04:38 PM

I've been seriously looking for a 94/95 droptop and have been wondering how much weight I would have to slice to get into the 13's. Even thought about removing the vert motors and working the top manually. What 1/4 time do you run now?

Killercanary · 02-11-2001, 10:42 PM

I have a solid 13 second 95 GT vert, and I still have the factory heads, cam, RR's, MAF, injectors, and fuel pump. I run consistent 13.8's at 98mph. I just ordered a set of AFR heads, and will be swapping the MAF, injectors, and fuel pump. Hopefully I will see low low 13's now. Give me a month and I'll let you know. My mods are listed below and you can see my timeslips and such at my website: http://www.angelfire.com/pa2/killercanary

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

redsn95vert · 02-12-2001, 11:39 AM

I'm guning for low 13s to high 12s on dot tires when I finish installing the combo...

------------------
95 GT convertable, 3.73 gears, bbk off road h-pipe, march underdrive pullies, Saleen wires, custom made cold air induction,
Future mods (Winter/Spring break)
Cobra intake w/ 65mm tb
GT40 heads, flowtech headers, Lunatti cam 230 duration 488 lift

02-11-2001, 09:22 AM	#1
TROYXTROY Registered Member Join Date: Jul 1999 Location: RI, USA Posts: 51	Any fast 94/95 GT Convertibles out there??? I have a 95 vert and was wondering if anybody got into the low 12's or high 11's. If yes, what did it take? Thanks, I was just curious! -Troy ------------------ 1995 GT Convertible K&N, Steeda G-Trac Stage 3 Suspension, Pro 5.0 Shifter, Kenny Brown Extreme Sub System, Ford Racing Underdrive Pulleys, Cobra R Rims, Steeda Adjustable Clutch Quadrant & Cable

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
Will my exhaust system from 91 gt bolt up to 82 gt?	4.6l-eatr	Windsor Power	1	02-04-2002 12:08 AM
Whooped an '85 GT with my Wife's Volvo	NO SLO PK	Stang Stories	8	07-20-2001 12:46 PM
Moroso results w/ stock 207K '87 GT	EZRIDN	Stang Stories	3	07-12-2001 03:58 PM
GT and LS-1 get into Tangle. GT WINS!!	Mercury	Stang Stories	8	06-26-2001 12:49 PM

02-11-2001, 04:38 PM	#2
S Howard Registered Member Join Date: Jun 2000 Location: Orlando, FL Posts: 195	I've been seriously looking for a 94/95 droptop and have been wondering how much weight I would have to slice to get into the 13's. Even thought about removing the vert motors and working the top manually. What 1/4 time do you run now?

02-11-2001, 10:42 PM	#3
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	I have a solid 13 second 95 GT vert, and I still have the factory heads, cam, RR's, MAF, injectors, and fuel pump. I run consistent 13.8's at 98mph. I just ordered a set of AFR heads, and will be swapping the MAF, injectors, and fuel pump. Hopefully I will see low low 13's now. Give me a month and I'll let you know. My mods are listed below and you can see my timeslips and such at my website: http://www.angelfire.com/pa2/killercanary ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

02-12-2001, 11:39 AM	#4
redsn95vert Registered Member Join Date: Jul 2000 Location: Rochester Posts: 323	I'm guning for low 13s to high 12s on dot tires when I finish installing the combo... ------------------ 95 GT convertable, 3.73 gears, bbk off road h-pipe, march underdrive pullies, Saleen wires, custom made cold air induction, Future mods (Winter/Spring break) Cobra intake w/ 65mm tb GT40 heads, flowtech headers, Lunatti cam 230 duration 488 lift