302 HO Heads on 351W

1989_351W · 04-24-2002, 07:37 AM

I was wondering, how much would it cost to convert to roller rockers on my 351W heads or could I put the heads off of a 302 HO. I would put larger valves and new springs of course. Is there any difference between the two except for the valve size?

95mustanggt · 04-24-2002, 08:50 AM

I believe the heads off the 302 will fit. Not sure on the valve train though.

fiveohpatrol · 04-24-2002, 10:48 AM

302 heads will fit a 351, the holes for the bolts just need to be drilled out larger.

why don't you just get a set of roller rockers for your 351 heads? are the pedestal or stud mount rockers on there now?

1989_351W · 04-25-2002, 01:34 AM

Any idea how much it would cost to convert for roller rockers? It is just the stock heads no guide plates.

04-24-2002, 07:37 AM	#1
1989_351W Registered Member Join Date: Jul 2001 Location: Spring Lake NC 28390 Posts: 44	302 HO Heads on 351W I was wondering, how much would it cost to convert to roller rockers on my 351W heads or could I put the heads off of a 302 HO. I would put larger valves and new springs of course. Is there any difference between the two except for the valve size? __________________ Michael Wigton 1989 351 Windsor 1964 1/2 Convertible

04-24-2002, 08:50 AM	#2
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	I believe the heads off the 302 will fit. Not sure on the valve train though. __________________ 1995 Mustang GT 20016 F150 Lariat Super Crew

04-24-2002, 10:48 AM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	302 heads will fit a 351, the holes for the bolts just need to be drilled out larger. why don't you just get a set of roller rockers for your 351 heads? are the pedestal or stud mount rockers on there now? __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

04-25-2002, 01:34 AM	#4
1989_351W Registered Member Join Date: Jul 2001 Location: Spring Lake NC 28390 Posts: 44	Any idea how much it would cost to convert for roller rockers? It is just the stock heads no guide plates. __________________ Michael Wigton 1989 351 Windsor 1964 1/2 Convertible

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Price estimate for barely used Edel. Perf. RPM alum. heads w/ 2.02/1.60 valves??	Simi Stang	Windsor Power	13	11-03-2003 11:23 PM
GT-40X heads ?	Mustang_289	Windsor Power	9	09-30-2003 08:21 AM
New Heads. Any Tips	66StangGuy	Classic Mustangs	5	09-15-2003 08:20 PM
Best Brands for 351W build? (pistons, rods, cam, heads, etc)	Fox Body	Windsor Power	9	07-07-2002 08:16 PM
??? about 351W heads on a 302	vande97	Windsor Power	2	05-15-2002 10:42 AM