smog pump delete

DemonGT · 05-15-2001, 06:13 PM

i plan on geting a march a/c delete and way way in the future plan on a a trim..can i just get the smog pump off and plug the holes and get a shorter belt or is there a kit i should get?

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires,Competition gauges,C&L 76mm MAF

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,65mm tb
ICQ#35670781

red82gt · 05-15-2001, 06:36 PM

If you plan on getting an A-trim, you'll need an eliminator kit but for now you can just block the holes annd get a shorter belt and route it from the crank straight up to the alternator, under the tensioner, over the A/C compressor around the power steering pump (or if no A/C) just over the PS pump, to the top of the water pump and around, back to the crank.

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

Dark_5.0 · 05-15-2001, 08:21 PM

Does anyone know what the belt number is that you need to bypass the smog pump?

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires

TheSloAod · 05-15-2001, 09:09 PM

go to the auto parts store and try diff. size belts... they will let you try as many of them as you want...

------------------
My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph

05-15-2001, 06:13 PM	#1
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	smog pump delete i plan on geting a march a/c delete and way way in the future plan on a a trim..can i just get the smog pump off and plug the holes and get a shorter belt or is there a kit i should get? ------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires,Competition gauges,C&L 76mm MAF Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,65mm tb ICQ#35670781

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
smog pump delete	89droptop	Windsor Power	11	03-15-2010 04:01 PM
cobra smog delete	jwhite1993	Windsor Power	1	12-04-2003 04:41 PM
Smog Pump Confusion	Evil Joe	Windsor Power	1	03-23-2003 08:04 AM
Smog pump delete........Any ET gain????	Dark_5.0	Windsor Power	2	07-31-2001 09:52 PM
PLEASE HELP!! Do I need the smog pump system to pass dyno emissions ??	Stang_ROTY	Windsor Power	5	07-02-2001 01:09 AM

05-15-2001, 06:36 PM	#2
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	If you plan on getting an A-trim, you'll need an eliminator kit but for now you can just block the holes annd get a shorter belt and route it from the crank straight up to the alternator, under the tensioner, over the A/C compressor around the power steering pump (or if no A/C) just over the PS pump, to the top of the water pump and around, back to the crank. ------------------ GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

05-15-2001, 08:21 PM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Does anyone know what the belt number is that you need to bypass the smog pump? ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires

05-15-2001, 09:09 PM	#4
TheSloAod Registered Member Join Date: Apr 2001 Location: baytown, tx usa Posts: 121	go to the auto parts store and try diff. size belts... they will let you try as many of them as you want... ------------------ My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph