EEC-IV replacement

RPM427 · 07-23-2002, 12:47 PM

Where can I buy a replacement computer for my 91 mustang GT besides the ford dealer?

RdRunnr · 07-23-2002, 12:57 PM

If you are looking used, you can go to ebay which always has a lot, www.stangparts.com, or any other place that parts out cars. If you want a new/refurbished one, Autzone and Pep Boys normally carry replacements but you have to give yours back as a core. I think the core charge is around $90 if you don't.

1hot5.0 · 07-23-2002, 01:07 PM

If you are looking for a stock computer replacement, I would look at Stangparts also. If you are looking for a performance replacement computer, I have heard nothing but good things about diablo chips. (This is kind of off subject, but my friend has one in his lightning and has no complaints). Diablo Performance Modules

RPM427 · 07-23-2002, 01:46 PM

Where can I have my computer checked? Can I bring it to a dealership and have them run some tests on it to determine if it is good or not? I really don't want to spent another $150+ on my car that doesn't fix the problem. I'd rather make sure the computer is toast before I buy another one.

PKRWUD · 07-23-2002, 03:28 PM

The only real way to determine if the ECM is bad is to replace it with a known good one, and see if things improve. You must know someone with a similar stang.

Take care,
~Chris

RPM427 · 07-23-2002, 03:53 PM

My friend has one, but it is modified. He says it has marks on it like it was opened with a crowbar. I will have to convince him to let me try it out. What is involved in a EEC transplant? Do I need any special tools to remove it? its in the pass kickpanel right?
The local ford dealership gave me a price of $150 for a brand new one ($249 - $100 core charge). That seems like a good price.

Mach 1 · 07-23-2002, 06:44 PM

I have two of them. One in my car and an extra that I bought with a maf conversion kit. I would let you try one out and see if it helps, but your too far away.

Have you done any troubleshooting yet? what are the symptoms?

RPM427 · 07-23-2002, 07:15 PM

Mach 1, please read this:
http://forums.mustangworks.com/showt...threadid=25708

venumus93 · 07-23-2002, 07:19 PM

You can also check your local salvage yards. I found an A9L for a '91 5.0 here for $75 out the door. Just another option & about half the cost of a new one!
Later!

07-23-2002, 12:47 PM	#1
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	EEC-IV replacement Where can I buy a replacement computer for my 91 mustang GT besides the ford dealer? __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

07-23-2002, 12:57 PM	#2
RdRunnr Registered Member Join Date: Dec 1999 Location: Newark,DE Posts: 98	If you are looking used, you can go to ebay which always has a lot, www.stangparts.com, or any other place that parts out cars. If you want a new/refurbished one, Autzone and Pep Boys normally carry replacements but you have to give yours back as a core. I think the core charge is around $90 if you don't. __________________ Eric 1990 Mustang GT 10.46 @130.97 ClickClickracing Forums

07-23-2002, 01:07 PM	#3
1hot5.0 Registered Member Join Date: Mar 2002 Location: Arizona Posts: 172	If you are looking for a stock computer replacement, I would look at Stangparts also. If you are looking for a performance replacement computer, I have heard nothing but good things about diablo chips. (This is kind of off subject, but my friend has one in his lightning and has no complaints). Diablo Performance Modules __________________ 91 Mustang LX 5.0 Convertible AOD Mdifications: K&N filter, Mac Catback, BBK aluminum u/d pulleys.

07-23-2002, 01:46 PM	#4
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	Where can I have my computer checked? Can I bring it to a dealership and have them run some tests on it to determine if it is good or not? I really don't want to spent another $150+ on my car that doesn't fix the problem. I'd rather make sure the computer is toast before I buy another one. __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

07-23-2002, 03:28 PM	#5
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	The only real way to determine if the ECM is bad is to replace it with a known good one, and see if things improve. You must know someone with a similar stang. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

07-23-2002, 03:53 PM	#6
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	My friend has one, but it is modified. He says it has marks on it like it was opened with a crowbar. I will have to convince him to let me try it out. What is involved in a EEC transplant? Do I need any special tools to remove it? its in the pass kickpanel right? The local ford dealership gave me a price of $150 for a brand new one ($249 - $100 core charge). That seems like a good price. __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

07-23-2002, 06:44 PM	#7
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	I have two of them. One in my car and an extra that I bought with a maf conversion kit. I would let you try one out and see if it helps, but your too far away. Have you done any troubleshooting yet? what are the symptoms? __________________ 2002 GT 1993 GT (SOLD) '93 Mustang GT RHC member #142

07-23-2002, 07:15 PM	#8
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	Mach 1, please read this: http://forums.mustangworks.com/showt...threadid=25708 __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

07-23-2002, 07:19 PM	#9
venumus93 Registered Member Join Date: Jun 2001 Location: West Melbourne, FL, USA Posts: 237	used=$$ savings! You can also check your local salvage yards. I found an A9L for a '91 5.0 here for $75 out the door. Just another option & about half the cost of a new one! Later! __________________ 93Cobra#3974, 114K miles 3.55's, flo's, pullies, C&L 1/4: 13.985 60': 2.088 (street tires) MPH: 99.58

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
foglight bulb replacement	82 GT	Windsor Power	4	08-03-2003 05:41 PM
Door Handle Replacement	Dan_Cicero	Small Ponies	1	05-28-2003 03:57 PM
Replacement stereo ?	surfbeast	Audio, Security, & Electronics	4	09-18-2002 05:38 AM
Seat Replacement in '90 Mustang	Southpaw	Windsor Power	3	01-28-2002 04:46 PM
Belt replacement	mustangLX92	Windsor Power	2	06-29-2001 02:27 AM