Possible new combo, anyone running similar?

885.0L · 09-28-2002, 01:31 PM

I am thinking of splurging and changing combination to: trickflow trackheat heads and intake 75mm tb with 42lbers. My current combo or stuff that will stay unchanged stock bottom end with comp cams 270hr (.533lift int&exh 215int 224exh@.050 114lobe seperation) headman equal lenght shorties and 21/2in. mac offroad H pipe & Atrim pulleyed to 10lbs. with power pipe,C&L 76mm mass air. I am curious to see if anyone has similar combo with hp&trq #s also very open to other head intake combos keeping in mind need to be half assed streetable.

avbcon12 · 09-28-2002, 02:20 PM

sounds good but you would deffinately benefit from longtubes.... think about it....

take care,
adam

885.0L · 09-28-2002, 05:36 PM

avbcon12 I have havent given it alot of thought until reading the other post. Now I am thinking on going with longtubes probably not till after money permitting, never researched topic which brand fit the best ,clearance wise.Also do I have to replace my H pipe or can a muffler shop make it work.

09-28-2002, 01:31 PM	#1
885.0L Registered Member Join Date: Sep 2002 Location: Slave Lake A.B. Posts: 9	Possible new combo, anyone running similar? I am thinking of splurging and changing combination to: trickflow trackheat heads and intake 75mm tb with 42lbers. My current combo or stuff that will stay unchanged stock bottom end with comp cams 270hr (.533lift int&exh 215int 224exh@.050 114lobe seperation) headman equal lenght shorties and 21/2in. mac offroad H pipe & Atrim pulleyed to 10lbs. with power pipe,C&L 76mm mass air. I am curious to see if anyone has similar combo with hp&trq #s also very open to other head intake combos keeping in mind need to be half assed streetable. __________________ 88 5.0l atrim 8rib pulley stock bottom end ported heads & intake stock.T.B stock. c&l 76mm mass air conv.19lbs inj.vortech fmu 255lph intank. man. vlvbdy.c4.3000tci stall b&mpro rachet. 3.73gears tagirdle. ssm lowers all for $10500can including price of car.

09-28-2002, 02:20 PM	#2
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	sounds good but you would deffinately benefit from longtubes.... think about it.... take care, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

09-28-2002, 05:36 PM	#3
885.0L Registered Member Join Date: Sep 2002 Location: Slave Lake A.B. Posts: 9	avbcon12 I have havent given it alot of thought until reading the other post. Now I am thinking on going with longtubes probably not till after money permitting, never researched topic which brand fit the best ,clearance wise.Also do I have to replace my H pipe or can a muffler shop make it work. __________________ 88 5.0l atrim 8rib pulley stock bottom end ported heads & intake stock.T.B stock. c&l 76mm mass air conv.19lbs inj.vortech fmu 255lph intank. man. vlvbdy.c4.3000tci stall b&mpro rachet. 3.73gears tagirdle. ssm lowers all for $10500can including price of car.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone here run a similar combo and if so, what times did it run?	slowfive0	Power Adders	3	02-02-2004 01:39 AM
New combo, anyone else running this??	rwhite65	Classic Mustangs	13	01-18-2003 12:15 AM
Small block Combo ??'s	Coupe Devil	Windsor Power	8	12-06-2002 12:17 AM
Will this COMBO run me 11's from running 14.20??	jz_mustang50	Windsor Power	3	09-26-2001 08:03 AM
New combo is up and running (just not idling) !!!	cojonepony	Windsor Power	3	07-30-2001 04:52 PM