best cam for stock motor aod mustang??

Z28EATR · 07-07-2001, 07:36 PM

my buddy has a 89 aod mustang, he wants to put a cam it the car and wants to know which would run best without him having to buy a stall converter.

87vert351 · 07-08-2001, 12:00 AM

With stock heads stock intake and pretty much everything else stock the stock cam is really not a bad cam. If he was to go through the trouble of changing cams it really wouldn't do much for him right now. The stock package is a really well matched combo.

------------------
351w, tremec trans 11.44@120 n/a 10.82@129 on the hose

macx · 07-08-2001, 01:51 AM

one well respected Mustang shop recommends
the smallest Crower hydr roller cam.
It's only a little longer duration but
a bunch more lift and is described as
very torquey and good with an aod.
www.crowercams.com

also check www.iskycams.com

macx · 07-08-2001, 01:54 AM

PS - HOWEVER I've read of lots of Mustangs
that kept the stock cam and upgraded
the restrictive head/intake/headers and
were surprisingly quick. Course, that IS
more $. "Cheap" upgrades there would be
the Explorer intakes (about same as the
Cobra) and Explorer P heads (need special headers)which both can be had thru ads in Mustang/ford mags quite reasonably.

NOS_Notch · 07-08-2001, 03:30 AM

The stock one is best.
You would gain a little lift w/ some 1.7's though.

------------------
'88 coupe...stock as a rock.
Check out http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

Nitrous Al · 07-08-2001, 06:33 PM

Tell your buddy to skip the cam and buy a 3.73:1 gearset! Don't bother with the cam yet!

John · 07-09-2001, 01:36 PM

Actually tell him to get 4:10's. I have them and love em' I drive about 30 miles to and from work on I-75 70-90 mph no probs. Mine is aod also

------------------
89 Notch: ASP Pullies,
K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core Radiator, FMS 4:10's, 1.5" cowl, cold air kit, hooker equal length shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans

07-09-2001, 01:39 PM

Tell him to save his $$$ and keep the stock cam w/ his stock set up (it's a nice cam).

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts);
30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)

07-09-2001, 03:22 PM

from everything i've read, the stock mustang cams are pretty good... without changin the heads, intake and exhaust, a cam is'nt much help...

best bang for the buck, rear end gears (3:73's or 4:10's)...

look at the articles on this board, one of them gives performance stuff that is free or very cheap, and adds extra hp...

------------------
Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump...

gears (4:10's) on their way!!!!

07-07-2001, 07:36 PM	#1
Z28EATR Registered Member Join Date: Jun 2000 Location: Florence, KY,USA Posts: 210	best cam for stock motor aod mustang?? my buddy has a 89 aod mustang, he wants to put a cam it the car and wants to know which would run best without him having to buy a stall converter.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Yellow Mustang Stampede TULSA OK August 17	stylin99	Ford Show & Go	2	11-09-2004 11:19 PM
Myrtle Beach Mustang Week 7/22-28/2002	GreenMachine93	Ford Show & Go	0	06-21-2002 05:59 PM
89-Mustang pulling trailer -vs- 2000 Mustang	Five0	Stang Stories	7	04-01-2001 02:50 AM
Salaeen, Shelby, Cobra please define these for me.	Taqus	Blue Oval Lounge	3	01-17-2001 02:39 AM

07-08-2001, 12:00 AM	#2
87vert351 Registered Member Join Date: Jul 2001 Location: Sterling Heights, MI Posts: 43	With stock heads stock intake and pretty much everything else stock the stock cam is really not a bad cam. If he was to go through the trouble of changing cams it really wouldn't do much for him right now. The stock package is a really well matched combo. ------------------ 351w, tremec trans 11.44@120 n/a 10.82@129 on the hose

07-08-2001, 01:51 AM	#3
macx Registered Member Join Date: Oct 1999 Location: Gordonville MO USA Posts: 448	one well respected Mustang shop recommends the smallest Crower hydr roller cam. It's only a little longer duration but a bunch more lift and is described as very torquey and good with an aod. www.crowercams.com also check www.iskycams.com

07-08-2001, 01:54 AM	#4
macx Registered Member Join Date: Oct 1999 Location: Gordonville MO USA Posts: 448	PS - HOWEVER I've read of lots of Mustangs that kept the stock cam and upgraded the restrictive head/intake/headers and were surprisingly quick. Course, that IS more $. "Cheap" upgrades there would be the Explorer intakes (about same as the Cobra) and Explorer P heads (need special headers)which both can be had thru ads in Mustang/ford mags quite reasonably.

07-08-2001, 03:30 AM	#5
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	The stock one is best. You would gain a little lift w/ some 1.7's though. ------------------ '88 coupe...stock as a rock. Check out http://www.burnouts.stangnet.com 11's coming soon!!!! Heads,intake and cam are all here

07-08-2001, 06:33 PM	#6
Nitrous Al Registered Member Join Date: May 2000 Location: Everett, MA Posts: 417	Tell your buddy to skip the cam and buy a 3.73:1 gearset! Don't bother with the cam yet!

07-09-2001, 01:36 PM	#7
John Registered Member Join Date: Dec 1998 Location: Ft.Myers, FL. Posts: 150	Actually tell him to get 4:10's. I have them and love em' I drive about 30 miles to and from work on I-75 70-90 mph no probs. Mine is aod also ------------------ 89 Notch: ASP Pullies, K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core Radiator, FMS 4:10's, 1.5" cowl, cold air kit, hooker equal length shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans

07-09-2001, 01:39 PM	#8
bada$$lx Guest Posts: n/a	Tell him to save his $$$ and keep the stock cam w/ his stock set up (it's a nice cam). ------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)

07-09-2001, 03:22 PM	#9
jerryIII Guest Posts: n/a	from everything i've read, the stock mustang cams are pretty good... without changin the heads, intake and exhaust, a cam is'nt much help... best bang for the buck, rear end gears (3:73's or 4:10's)... look at the articles on this board, one of them gives performance stuff that is free or very cheap, and adds extra hp... ------------------ Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump... gears (4:10's) on their way!!!!