The swap begins!!

STR864 · 02-06-2003, 09:52 AM

Well I am going to start the motor swap this weekend....from my straight 6 200ci to my nice 302

...can't wait....already bought some shorty headers and underdrive pulleys for the 302....hope to add some more stuff to it after its in....got a question about the transmission. I'm taking the Tremec T5 tranny out of the 87 and putting it in my 65, is there a new cross memeber I'm going to have to buy? is it going to fit right in? and the same questions with the 8.8 rear end?! If any of you mustang guru's know...I would highly appreciate the help....thank you!!

Tom

trevor'72 · 02-06-2003, 11:17 PM

Hello Tom,

Sounds like a pretty cool project, and I hate to burst your bubble but ford didn't ever put a Tremec tanny in anything form the factory except the 2000 Cobra R, that recieved the t56 6-speed.

What you do have is probably a run of the mill stock T5, which is a great relieable tranny. Before you install that puppie you might what to have a shop take a peek inside as the T5s have a tendency to be very had on 3rd gear, as well if it is a non-sincronised revers tranny the reverse is usually chewed up too.

On a more possitive note a crossmember is available for this application. (T5 in 65 mustang). I would start by contacting a company called Windsor Fox. They make all kinds of unique things such as you desire for your application.

Good luck this weekend.

STR864 · 02-06-2003, 11:21 PM

Quote:

Originally posted by trevor'72
Hello Tom,

Sounds like a pretty cool project, and I hate to burst your bubble but ford didn't ever put a Tremec tanny in anything form the factory except the 2000 Cobra R, that recieved the t56 6-speed.

What you do have is probably a run of the mill stock T5, which is a great relieable tranny. Before you install that puppie you might what to have a shop take a peek inside as the T5s have a tendency to be very had on 3rd gear, as well if it is a non-sincronised revers tranny the reverse is usually chewed up too.

On a more possitive note a crossmember is available for this application. (T5 in 65 mustang). I would start by contacting a company called Windsor Fox. They make all kinds of unique things such as you desire for your application.

Good luck this weekend.

Yeah, I brought the car to a transmission shop and they said it is awesome shape...it looks like it was just rebuilt, like what the guy told me that I bought it from....so the tranny is in great condition...it has bout 250 miles on it

But with the reverse---is that why I get a little grind every now and then when I put it in reverse??

trevor'72 · 02-06-2003, 11:32 PM

That's exatly why!

The car must come to a full stop and have the clutch depressed for a few seconds to ensure no grinding.

We have a '94 explorer that does this from time to time when I'm in a hurry to back up.

So now I'm confused is the tranny installed or not?

If I'm just running behind how did it go? the goods bads?

STR864 · 02-06-2003, 11:37 PM

Well the motor and the t5 is still in the 87 until tomorrow when I pull it out....oh ya...thanks for that website...very big help....

02-06-2003, 09:52 AM	#1
STR864 Registered Member Join Date: Dec 2002 Location: Orlando, FL Posts: 34	The swap begins!! Well I am going to start the motor swap this weekend....from my straight 6 200ci to my nice 302 ...can't wait....already bought some shorty headers and underdrive pulleys for the 302....hope to add some more stuff to it after its in....got a question about the transmission. I'm taking the Tremec T5 tranny out of the 87 and putting it in my 65, is there a new cross memeber I'm going to have to buy? is it going to fit right in? and the same questions with the 8.8 rear end?! If any of you mustang guru's know...I would highly appreciate the help....thank you!! Tom

02-06-2003, 11:17 PM	#2
trevor'72 Registered Member Join Date: Feb 2003 Posts: 35	tranny crossmember Hello Tom, Sounds like a pretty cool project, and I hate to burst your bubble but ford didn't ever put a Tremec tanny in anything form the factory except the 2000 Cobra R, that recieved the t56 6-speed. What you do have is probably a run of the mill stock T5, which is a great relieable tranny. Before you install that puppie you might what to have a shop take a peek inside as the T5s have a tendency to be very had on 3rd gear, as well if it is a non-sincronised revers tranny the reverse is usually chewed up too. On a more possitive note a crossmember is available for this application. (T5 in 65 mustang). I would start by contacting a company called Windsor Fox. They make all kinds of unique things such as you desire for your application. Good luck this weekend.

02-06-2003, 11:32 PM	#4
trevor'72 Registered Member Join Date: Feb 2003 Posts: 35	yup That's exatly why! The car must come to a full stop and have the clutch depressed for a few seconds to ensure no grinding. We have a '94 explorer that does this from time to time when I'm in a hurry to back up. So now I'm confused is the tranny installed or not? If I'm just running behind how did it go? the goods bads?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
429/460 swap	429mustang	Blue Oval Lounge	3	02-29-2008 02:43 PM
Cobra Engine Swap...Ways to improve my 98 GT...	xtrememach1racer	Modular Madness	3	10-31-2002 11:23 AM
T-56 or other 6-speed swap in 65 Fastback	DJs350H	Classic Mustangs	2	09-06-2001 03:57 PM
Rearend swap	H'YAMULE	Classic Mustangs	0	02-19-2001 09:48 AM
2.3 turbo swap	frankiebonzz	Small Ponies	0	06-01-2000 07:44 PM

02-06-2003, 11:37 PM	#5
STR864 Registered Member Join Date: Dec 2002 Location: Orlando, FL Posts: 34	Well the motor and the t5 is still in the 87 until tomorrow when I pull it out....oh ya...thanks for that website...very big help....