Nos

GerryGT · 07-01-2003, 05:44 PM

I have just bought a dry nos kit for my 2000 gt and I was wondering if I should get any gauges on the inside of the car and if so what can you recommend.

Thanks,
Gerry

byrnech · 07-06-2003, 02:41 PM

You could get a nitrous bottle pressure gauge, and a fuel pressure gauge. Those are fairly important when running nitrous.

90GT398 · 07-06-2003, 02:52 PM

hey ByrneCH I thought you went a best mph of 113 on drag radials?? LOL how you been bro good to see you alive and kicking

fiveohpatrol · 07-07-2003, 03:39 PM

For a dry kit, I would certainly reccomend getting a fuel pressure gage that you can read while driving.

The dry kits rely on greatly increased fuel pressure to add the additional fuel. The kit I had on my car for a while increased it from 40 up to 80psi with the nitrous activated. I would assume its about the same for a 4.6 car.

Have fun, but be careful with it. You don't wanna blow that plastic intake to pieces!

95stangf · 07-09-2003, 01:44 AM

air/fuel ratio gauge would also be good , i got a fuel pressure and a bottle press, and im getting the a/f gauge soon, especially for the 4.6 cause of the plastic intake, on my 4.6 the intake cracked and it was stock

07-01-2003, 05:44 PM	#1
GerryGT Registered Member Join Date: Feb 2003 Posts: 28	Nos I have just bought a dry nos kit for my 2000 gt and I was wondering if I should get any gauges on the inside of the car and if so what can you recommend. Thanks, Gerry

07-06-2003, 02:41 PM	#2
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	You could get a nitrous bottle pressure gauge, and a fuel pressure gauge. Those are fairly important when running nitrous. __________________ 331 10:1, AFR 185's, TFS-R intake

07-06-2003, 02:52 PM	#3
90GT398 Registered Member Join Date: Jun 2003 Location: USA Posts: 25	113 on DR's hey ByrneCH I thought you went a best mph of 113 on drag radials?? LOL how you been bro good to see you alive and kicking

07-07-2003, 03:39 PM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	For a dry kit, I would certainly reccomend getting a fuel pressure gage that you can read while driving. The dry kits rely on greatly increased fuel pressure to add the additional fuel. The kit I had on my car for a while increased it from 40 up to 80psi with the nitrous activated. I would assume its about the same for a 4.6 car. Have fun, but be careful with it. You don't wanna blow that plastic intake to pieces! __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

07-09-2003, 01:44 AM	#5
95stangf Registered Member Join Date: Jul 2003 Location: tx Posts: 5	air/fuel ratio gauge would also be good , i got a fuel pressure and a bottle press, and im getting the a/f gauge soon, especially for the 4.6 cause of the plastic intake, on my 4.6 the intake cracked and it was stock __________________ 95 mustang k&n, bbk c.a.i, bbk 65 tb, tb enhancer, aeromotive fuel press reg, msd coil, ford 9mm wires, ngk's, e-cam, flowtech headers, bbk h-pipe, flowmasters, 3:73's, 75hp nitros

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: