Back in black! 96-98(?) Z28 bites the big one!

Snakeman · 03-15-2001, 04:49 PM

I LOVE my car!

I saw him ahead, classic race! white Z28 vs. Black Mustang! i caught up and got alongside. a couple of revs, and it was clear it was ON! i only dropped to 4th, and it took a bit to get to optimum rpms, but I caught and passed him!

the second time, we caught a light. I took him easily as I spun through first and second...

third time. got a light, but I was still rolling a little. caught first with some spin, not caring, I dumped 2nd! spun a little, hooked and took OFF!, by the top of third, i was 3 to 4 cars ahead!

I flashed my hedlights and he waved as we went our separate ways.

Ford 1
Chevy 0

No Nitrous. no offroad pipe (4 cats! :eek

just my rebuilt motor.
Glad to be back!

------------------
Rob Wegner
90LX

red82gt · 03-15-2001, 05:43 PM

That's a good way to break in a new motor! Good kill!

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

Snakeman · 03-15-2001, 06:09 PM

I put 3-4 tanks of gas through it before last night. I think its broken in pretty well. I hit a flat spot up top, not sure if it was the limiter or too much timing. going to back it down to 10* and work from there.

nice to show the chevy boys my taillights!
he had someone riding shotgun, couldn't tell if it was his girlfriend who watched his humilitation...

L8!

Fox Body · 03-15-2001, 06:09 PM

Good run Snakeman. Thanks for representing.
You got a good looking car too. Makes me long for paint for my car

-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1.5" MAC full length headers
Holley 750 CFM
Edelbrock intake
2.5" Off road H-pipe, 2-chamber Flowmasters
8.8" Rear end w/ 3.55 gears (Now that's more like it!!)

Front: 225/60/15 Rear: 255/60/15 Eagle GT II
14 x 4” K&N air filter (getting the Xtreme setup soon)

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green
that I may conquer all who dare abide there beside me. May they be left thither
behind burnt black." ---Fox Body

fastang · 03-15-2001, 06:57 PM

Glad to hear you got that beast back together. Are you still gonna squeeze or are you finished with the NOS?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

03-15-2001, 04:49 PM	#1
Snakeman Registered Member Join Date: Apr 1999 Location: Grass Valley, CA, USA Posts: 1,389	Back in black! 96-98(?) Z28 bites the big one! I LOVE my car! I saw him ahead, classic race! white Z28 vs. Black Mustang! i caught up and got alongside. a couple of revs, and it was clear it was ON! i only dropped to 4th, and it took a bit to get to optimum rpms, but I caught and passed him! the second time, we caught a light. I took him easily as I spun through first and second... third time. got a light, but I was still rolling a little. caught first with some spin, not caring, I dumped 2nd! spun a little, hooked and took OFF!, by the top of third, i was 3 to 4 cars ahead! I flashed my hedlights and he waved as we went our separate ways. Ford 1 Chevy 0 No Nitrous. no offroad pipe (4 cats! :eek just my rebuilt motor. Glad to be back! ------------------ Rob Wegner 90LX

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Black Interior Parts	Sonics2042	Windsor Power	16	07-07-2002 05:47 PM
Time to go back to school.	Unit 5302	Modular Madness	12	04-27-2002 03:46 PM
black sheep	bigwhitecobra	Blue Oval Lounge	12	03-11-2002 10:23 AM
SD to mass air, back to SD?	fiveohpatrol	Windsor Power	16	02-09-2002 04:58 PM
Embarrasing Moment from a while back. Thought I had won a Million Smackers!	Mercury	Blue Oval Lounge	8	06-04-2001 05:03 AM

03-15-2001, 05:43 PM	#2
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	That's a good way to break in a new motor! Good kill! ------------------ GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

03-15-2001, 06:09 PM	#3
Snakeman Registered Member Join Date: Apr 1999 Location: Grass Valley, CA, USA Posts: 1,389	I put 3-4 tanks of gas through it before last night. I think its broken in pretty well. I hit a flat spot up top, not sure if it was the limiter or too much timing. going to back it down to 10* and work from there. nice to show the chevy boys my taillights! he had someone riding shotgun, couldn't tell if it was his girlfriend who watched his humilitation... L8!

03-15-2001, 06:09 PM	#4
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	Good run Snakeman. Thanks for representing. You got a good looking car too. Makes me long for paint for my car ------------------------------- '79 Mustang Coup 4" Cowl Weld wheels (15x6;15x8) Stock 5.8L C4 w/ shift kit 1.5" MAC full length headers Holley 750 CFM Edelbrock intake 2.5" Off road H-pipe, 2-chamber Flowmasters 8.8" Rear end w/ 3.55 gears (Now that's more like it!!) Front: 225/60/15 Rear: 255/60/15 Eagle GT II 14 x 4” K&N air filter (getting the Xtreme setup soon) "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

03-15-2001, 06:57 PM	#5
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Glad to hear you got that beast back together. Are you still gonna squeeze or are you finished with the NOS? ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors