Anyone have a 300 F-150

Smokedawg · 08-03-2001, 11:26 AM

I have a 96' Ford F-150 w/a 300 and it sputters bad..I have come to the conclusion thats its a bad injector. My problem is what size injectors does it have?

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

[This message has been edited by Smokedawg (edited 08-03-2001).]

Unit 5302 · 08-04-2001, 02:17 AM

Just look at the plastic connector cover on it. If it's orange, 19lb, blue is 24lb.

Smokedawg · 08-04-2001, 05:13 PM

I just didnt think that a straight 6 truck would have that big of injectors..I thought they would be smaller than 19's...

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Unit 5302 · 08-04-2001, 05:48 PM

To make the same power, a 6 cylinder vehicle needs 25% larger injectors than a V-8. Just because it has less cylinders.

19lb injectors are the most common units for Ford. They are used in a ton of cars.

08-03-2001, 11:26 AM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Anyone have a 300 F-150 I have a 96' Ford F-150 w/a 300 and it sputters bad..I have come to the conclusion thats its a bad injector. My problem is what size injectors does it have? ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. [This message has been edited by Smokedawg (edited 08-03-2001).]

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-04-2001, 02:17 AM	#2
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Just look at the plastic connector cover on it. If it's orange, 19lb, blue is 24lb.

08-04-2001, 05:13 PM	#3
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	I just didnt think that a straight 6 truck would have that big of injectors..I thought they would be smaller than 19's... ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

08-04-2001, 05:48 PM	#4
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	To make the same power, a 6 cylinder vehicle needs 25% larger injectors than a V-8. Just because it has less cylinders. 19lb injectors are the most common units for Ford. They are used in a ton of cars.