stereo question for Power...Please help

82 GT · 07-11-2001, 04:23 PM

Power, since you are in the stereo business I thought you might know the answer to this question. I have a Sony 270watt home stereo system and I can't get the volume past #3 without the disk skipping. It has lots of bass and is pretty loud at #3 even. It just seems the bass is effecting the disk operation. It's about 10yrs old now and it didn't do this when it was new. Would getting the disk laser re-aligned help anything? Or do you think the speakers are too close to the unit? I want to be able to turn it up more and really jam the neighbors out!!

Dark_5.0 · 07-12-2001, 11:16 PM

Since it doesnt look like Power is gonna help you, He was probably installing a monster system and got trapped under the speaker box or something.

I have a loud home stereo just like you and if I put the speakers too close to the stereo sometimes it will skip cause of the bass.

If your stereo is on a hard floor that could make a difference in my old apartment I had the stereo on a tile floof and it would skip with the bass up loud on it.

In the apartment that I live in now I have my stereo on carpet and it doesnt skip anymore so if your stereo is on a hard surface maybe throw a rug under it or something to absorb the vibration.

If the laser alignment is off usually it will skip at all volume levels not just when you crank it.

Good luck

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs.
best 60 ft 2.14, best 1/8th 9.65, best 1/4 15.2 @89mph, Stock gears and 3000+ Altitude

Power · 07-13-2001, 12:44 PM

I'm terribly sorry 82GT. Being as I'm in the army sometimes things happen that are out of my control. I was trapped into a firing range all week and haven't been home at all.

As for you question, 5.0HO hit the nail on the head. While it may not feel like any vibration to you, having subs on the floor will set up a resonance through the floor that can mess with the laser. Being as its 10 years old I'm sure age would make it easier to skip as well. An old rug or carpet should definitly help. I'll be on tonight again after work if you have follow up questions.

82 GT · 07-13-2001, 03:19 PM

Thanks guys for the advice. I have 2 12inch JL subwoofers that used to be in my car and I brought them in and hooked them up to my house stereo. I realized after I posted my question that my subs were right next to the stereo cabinet. I moved them away and I might put some foam padding between them to help absorb some vibration.
My stereo is on carpet. I will let you know how it works the next time I get a chance to crank it or the next time the neighbors act like *** ***** with there stereo.
I never had the laser realigned so I guess it's way over due...huh? Would I notice a difference in quality when I get that done or not really? How much does a shop usually charge to do that?
Thanks again

07-11-2001, 04:23 PM	#1
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	stereo question for Power...Please help Power, since you are in the stereo business I thought you might know the answer to this question. I have a Sony 270watt home stereo system and I can't get the volume past #3 without the disk skipping. It has lots of bass and is pretty loud at #3 even. It just seems the bass is effecting the disk operation. It's about 10yrs old now and it didn't do this when it was new. Would getting the disk laser re-aligned help anything? Or do you think the speakers are too close to the unit? I want to be able to turn it up more and really jam the neighbors out!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
aftermarket stereo question	GhettoPop	Windsor Power	3	08-12-2004 09:54 PM
Off topic. mustang stereo question	matt1190	Classic Mustangs	2	03-03-2003 07:18 PM
Yet Another Stereo Question	DaveyBoy2002	Audio, Security, & Electronics	4	02-01-2003 08:20 PM
factory stereo question	82 GT	Windsor Power	1	09-15-2001 08:14 AM
stereo question	82 GT	Blue Oval Lounge	9	05-23-2001 04:36 PM

07-12-2001, 11:16 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Since it doesnt look like Power is gonna help you, He was probably installing a monster system and got trapped under the speaker box or something. I have a loud home stereo just like you and if I put the speakers too close to the stereo sometimes it will skip cause of the bass. If your stereo is on a hard floor that could make a difference in my old apartment I had the stereo on a tile floof and it would skip with the bass up loud on it. In the apartment that I live in now I have my stereo on carpet and it doesnt skip anymore so if your stereo is on a hard surface maybe throw a rug under it or something to absorb the vibration. If the laser alignment is off usually it will skip at all volume levels not just when you crank it. Good luck ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs. best 60 ft 2.14, best 1/8th 9.65, best 1/4 15.2 @89mph, Stock gears and 3000+ Altitude

07-13-2001, 12:44 PM	#3
Power Registered Member Join Date: Feb 2001 Location: Oregon Posts: 420	I'm terribly sorry 82GT. Being as I'm in the army sometimes things happen that are out of my control. I was trapped into a firing range all week and haven't been home at all. As for you question, 5.0HO hit the nail on the head. While it may not feel like any vibration to you, having subs on the floor will set up a resonance through the floor that can mess with the laser. Being as its 10 years old I'm sure age would make it easier to skip as well. An old rug or carpet should definitly help. I'll be on tonight again after work if you have follow up questions.

07-13-2001, 03:19 PM	#4
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Thanks guys for the advice. I have 2 12inch JL subwoofers that used to be in my car and I brought them in and hooked them up to my house stereo. I realized after I posted my question that my subs were right next to the stereo cabinet. I moved them away and I might put some foam padding between them to help absorb some vibration. My stereo is on carpet. I will let you know how it works the next time I get a chance to crank it or the next time the neighbors act like * *** with there stereo. I never had the laser realigned so I guess it's way over due...huh? Would I notice a difference in quality when I get that done or not really? How much does a shop usually charge to do that? Thanks again