What is the PN on a Walbro 255lph in tank pump?

NOSstang89 · 05-13-2001, 02:15 AM

I bought this pump today from USA Motorsports, but it wasn't in it's original packaging (I got the 'display model'). Anyways, I just want to make sure the number is right so I know I have the right pump. The number on it is GSS307 and 16700-1, patent # 45002705421306. Thanks!!

------------------
'92LX hatch, 302 w/TFS Street Heats, Performer RPM intake, Crane cam .499/.510, Crower 1.6rr, 70mmTB/EGR, Pro-M 75mm Maf, SVO 30lb injectors, BBK underdrive pullies, 190lph intank pump, BBK short headers, MAC 2.5" off road X pipe, FMS King Cobra clutch, 3.73 gears, SVO upper arms, HPM Megabite Jr. lowers, Moser forged axles, lakewood driveshaft loop, air pump removed

stangsrule · 05-13-2001, 01:51 PM

After doing some searching on the web I have discovered that the GSS307 is a 255lph pump. Hope this helps!

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

NOSstang89 · 05-13-2001, 09:43 PM

Thanx a ton!! I did some searching on the web too and couldn't find anything. It helps a lot, thank you very much!!

------------------
'92LX hatch, 302 w/TFS Street Heats, Performer RPM intake, Crane cam .499/.510, Crower 1.6rr, 70mmTB/EGR, Pro-M 75mm Maf, SVO 30lb injectors, BBK underdrive pullies, 190lph intank pump, BBK short headers, MAC 2.5" off road X pipe, FMS King Cobra clutch, 3.73 gears, SVO upper arms, HPM Megabite Jr. lowers, Moser forged axles, lakewood driveshaft loop, air pump removed

stangsrule · 05-14-2001, 01:37 AM

Just glad to be of some help! I just got a Walbro 255lph pump myself but it is a differant number again... I was told it is their newest one soo maybe the info hasn't made it onto the internet yet... Anyway, your's matches up with the 255 #'s I did find so you are good to go.

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

05-13-2001, 02:15 AM	#1
NOSstang89 Registered Member Join Date: Apr 1999 Location: Dallas/College Station, Texas Posts: 143	What is the PN on a Walbro 255lph in tank pump? I bought this pump today from USA Motorsports, but it wasn't in it's original packaging (I got the 'display model'). Anyways, I just want to make sure the number is right so I know I have the right pump. The number on it is GSS307 and 16700-1, patent # 45002705421306. Thanks!! ------------------ '92LX hatch, 302 w/TFS Street Heats, Performer RPM intake, Crane cam .499/.510, Crower 1.6rr, 70mmTB/EGR, Pro-M 75mm Maf, SVO 30lb injectors, BBK underdrive pullies, 190lph intank pump, BBK short headers, MAC 2.5" off road X pipe, FMS King Cobra clutch, 3.73 gears, SVO upper arms, HPM Megabite Jr. lowers, Moser forged axles, lakewood driveshaft loop, air pump removed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
in tank fuel pump	stang_racer20	Windsor Power	11	10-10-2003 09:38 PM
255lph fuel pump install	white91gt	Power Adders	7	08-06-2003 11:23 AM
How to turn a high pressure in tank pump into a low pressure pump!!	crazypete	Windsor Power	6	09-30-2002 11:10 AM
255lph pump acting funny	blueneonman1	Windsor Power	1	05-30-2002 10:13 AM
What is the proper way to empty the gas tank and check a external fuel pump?	Stang_ROTY	Windsor Power	1	07-23-2001 12:10 PM

05-13-2001, 01:51 PM	#2
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	After doing some searching on the web I have discovered that the GSS307 is a 255lph pump. Hope this helps! ------------------ 92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

05-13-2001, 09:43 PM	#3
NOSstang89 Registered Member Join Date: Apr 1999 Location: Dallas/College Station, Texas Posts: 143	Thanx a ton!! I did some searching on the web too and couldn't find anything. It helps a lot, thank you very much!! ------------------ '92LX hatch, 302 w/TFS Street Heats, Performer RPM intake, Crane cam .499/.510, Crower 1.6rr, 70mmTB/EGR, Pro-M 75mm Maf, SVO 30lb injectors, BBK underdrive pullies, 190lph intank pump, BBK short headers, MAC 2.5" off road X pipe, FMS King Cobra clutch, 3.73 gears, SVO upper arms, HPM Megabite Jr. lowers, Moser forged axles, lakewood driveshaft loop, air pump removed

05-14-2001, 01:37 AM	#4
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	Just glad to be of some help! I just got a Walbro 255lph pump myself but it is a differant number again... I was told it is their newest one soo maybe the info hasn't made it onto the internet yet... Anyway, your's matches up with the 255 #'s I did find so you are good to go. ------------------ 92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.