looking for the best, east coast manufacturer of c-4

tarmon8r · 10-10-2002, 03:19 PM

any recommendations on getting the right c-4 and converter for my combo. i was hoping not to spend 2 grand on it but i think i might have to.

LX XLR8R · 10-10-2002, 03:22 PM

without a doubt it would have to be Dynamic..there # is 302-454-9203..i talked to Sean and i met him midway to pick it up..my Compition C-4 with a few extra bells and wistles and my 4kstall was a very good price also

tarmon8r · 10-10-2002, 03:28 PM

where are they out of?

LX XLR8R · 10-10-2002, 03:45 PM

hmmm..delaware maybeee?

10-10-2002, 03:19 PM	#1
tarmon8r Registered Member Join Date: Jun 2002 Location: manassas, va Posts: 186	looking for the best, east coast manufacturer of c-4 any recommendations on getting the right c-4 and converter for my combo. i was hoping not to spend 2 grand on it but i think i might have to. __________________ 1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided

10-10-2002, 03:22 PM	#2
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	without a doubt it would have to be Dynamic..there # is 302-454-9203..i talked to Sean and i met him midway to pick it up..my Compition C-4 with a few extra bells and wistles and my 4kstall was a very good price also __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

10-10-2002, 03:28 PM	#3
tarmon8r Registered Member Join Date: Jun 2002 Location: manassas, va Posts: 186	where are they out of? __________________ 1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided

10-10-2002, 03:45 PM	#4
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	hmmm..delaware maybeee? __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
West Coast Heads Up Series	Grip9 Motorsports	Ford Show & Go	0	02-27-2003 01:20 PM
Wildwood, NJ East Coast Nationals car show	91LX2Bfast	Blue Oval Lounge	1	04-30-2001 03:38 PM