need help with a stroked 351

Mustangboy89 · 01-26-2003, 07:25 AM

just wondering if anyone knows the part number on a distributor for my car i'm building up a stroked 351 and all i lack is the distributor for it. i had a msd distributor in my 302 but i had some bad luck with it so if anyone would have a part number or know of a good brand to get any help would be appreciated. thanks for ur time

HotRoddin · 01-27-2003, 01:40 AM

Well MSD makes probably the most popular Hi Performance distributor out there, so your problems were likely just a fluke. I doubt you'd have them again. There are lots of ways you can go ... all the way back to a stock distributor. Just look up the distributor you need for a 351 in any catalog ... the stroker part makes no difference. Just make sure you get the right gear on it ... if you have a roller cam with a steel drive gear then you have to run a matching gear on the distributor.

01-26-2003, 07:25 AM	#1
Mustangboy89 Registered Member Join Date: May 1999 Location: garrett,kentucky Posts: 77	need help with a stroked 351 just wondering if anyone knows the part number on a distributor for my car i'm building up a stroked 351 and all i lack is the distributor for it. i had a msd distributor in my 302 but i had some bad luck with it so if anyone would have a part number or know of a good brand to get any help would be appreciated. thanks for ur time __________________ mustangboy89

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stroked vs. Blown	gilmoujr	Modular Madness	8	04-12-2004 12:45 AM
Stroked 351w in Fox	Mustang_289	Windsor Power	2	03-02-2004 12:09 AM
Stroked 351	bottlebaby91	Windsor Power	5	08-23-2003 09:34 PM
Bored & Stroked	chetwindell	Windsor Power	9	07-11-2002 09:46 PM
Let's talk about gettin' STROKED!	1HOTGT	Windsor Power	4	04-27-2001 10:30 AM

01-27-2003, 01:40 AM	#2
HotRoddin cranky old man Join Date: Sep 2001 Location: Longview Texas Posts: 683	Well MSD makes probably the most popular Hi Performance distributor out there, so your problems were likely just a fluke. I doubt you'd have them again. There are lots of ways you can go ... all the way back to a stock distributor. Just look up the distributor you need for a 351 in any catalog ... the stroker part makes no difference. Just make sure you get the right gear on it ... if you have a roller cam with a steel drive gear then you have to run a matching gear on the distributor.