Update work In Progress 3.8L Corner Carver

[Miss Mischief]

I am happy to sayThat I Myself Replaced the Pinion and Gear in her rear end "Lilly Beth Farie Dust Super Charged 6" It was Going to Be Nymph But with all the guys I already Put up with that would have gotten me a ton of s h i t PERIOD A Nymph Is a Mythicial farie Like Creature Not a SEX maniac well following Up On Many of the suggestions I recieved while I dropped her transmision and sent it off to Get rebuilt as well as dropping my drive shaft the stock one and sending off with the Tranny to get it Trued "You wouldnt bealive the difference this makes even with the stock drive shaft". I Installed Frame Braces to stiffen her Up a Bit and I had a 6psi Paxton super charger with some Modification I was ablle to get it installed no Trouble. I may add an enlarged 3" single exshaust with headers Later but Really I am In no Big hurry. After Putting her all back together again I took her out and WoW What a Difference The Frame Braces made and the trued Drives shaft. Next wil be a decent set of 17" Rims and some 245 ZR Rubber, But Im very proud Of How far she has Gotten. Unfortunatly After Talking with many Snake heads 5.0 drivers as well as Gt Owners who are corner carvers I have found that the super charger is Just a Bad Idea..... They have Turbo Chargers and although It providse less presure then a 6 8 10 11 PSI blower the Power band is very wide where as when I gas Mine with the 6 psi super charger thats what you get. No throttle control But I am Not interested in forking over $4,000.00 For a Good Turbo. They have suggested I go a stroker route if I dont want a turbo and I have learned from here what a stroker is all about.