Dual reserve MC swap?

[Rev]

The first time I did it on my '66 coupe, I was installing a front disk swap kit from a Granada to the '66. I got the kit from Jim's Mustang in El Cajon Ca. It came with a new manual dual chamber MC for the front disk/rear drum and with an adjustable proportioning valve (highly recommended). I did have to fabricate a brake pedal arm stop to make sure the rod (non captured in the MC) didn't come out of the MC (that would be a major disaster).

The second installation was to convert to power brakes. There isn't enough room for the '67 booster and dual chamber MC to fit without denting in the drivers side shock tower. National Parts Depot sells a special thinner booster with the power brake dual chamber MC that fits the '65-66 cars. With the installation kit, it sells for about $425-450. I put that in and it works great (this actuating rod is captured in the MC). No need for the brake pedal stop.

I also installed kevlar rear shoes and front pads (high tech advanced performance pieces) from Praise Dyno Brakes at a cost of $250. My 38 year old stang now stops sure and straight similar in performance to late model cars. Total cost was $1350 but I paid twice for the MC.

If you can possibly manage the cost, then do convert to front disks and with power booster as well. I know it's extra money, but the Praise Dyno pads and shoes are worth it too. Been there (wasted $500 on a stock rebuild at first) and then did all the rest mentioned later.

Rev