new guy needs help from knowledgeable guys

bigwhitecobra · 01-22-2001, 09:19 AM

Having a blown car, I think I will be able to answer most of your questions. First, look at all the different SC's out there and find the one you want. I recommend a Vortech, but it may not be for you. Second, I highly recommend an aftercooler. The tempature of the boost, without a cooler, is enough to cause detonation by itself, if you don't keep it tuned properly at all times. You'll need to think about FMU's and ignition boxes. I recommend MSD's 6-BTM, it has a built in boost retard. However, I am having problems with the stock ignition blowing my MSD boxes. I am not sure what is causing it, if you are curios to find out if this something you need to worry about, call MSD like I am and find out if it is something in the stock igintion that will cause this.
Sorry for this being so long, bu this is just the begining. If you want, you can e-mail me and I'll send you some more info. This should be enough to point you in the right direction. Hope I've helped some.

Oh, and why get rid of the Cyclone, and how much you want for it?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SN-92,SN-93,GSS Paxton Ball-Drive Guys Step INSIDE	Mustanguy	Windsor Power	4	02-13-2006 12:13 PM
Let me know what u think guys, kinda long	ex-lt1-guy	Blue Oval Lounge	2	03-04-2002 01:11 PM
Here is the deal with the GM guys at work	bri32z	Stang Stories	22	11-27-2001 01:34 PM
dynoed my car guys!	46stang	Blue Oval Lounge	7	09-11-2001 09:08 AM
dynoed my car guys!	46stang	Stang Stories	3	09-08-2001 11:49 AM

01-22-2001, 09:19 AM	#5
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	Having a blown car, I think I will be able to answer most of your questions. First, look at all the different SC's out there and find the one you want. I recommend a Vortech, but it may not be for you. Second, I highly recommend an aftercooler. The tempature of the boost, without a cooler, is enough to cause detonation by itself, if you don't keep it tuned properly at all times. You'll need to think about FMU's and ignition boxes. I recommend MSD's 6-BTM, it has a built in boost retard. However, I am having problems with the stock ignition blowing my MSD boxes. I am not sure what is causing it, if you are curios to find out if this something you need to worry about, call MSD like I am and find out if it is something in the stock igintion that will cause this. Sorry for this being so long, bu this is just the begining. If you want, you can e-mail me and I'll send you some more info. This should be enough to point you in the right direction. Hope I've helped some. Oh, and why get rid of the Cyclone, and how much you want for it?